UL Ti MATE RANGE - MODEL - UL Ti MATE 130 -FIXED underwater lights limited™ UL Ti MATE 130 FIXED PART NO. S00475 TECHNICAL SPECIFICATION Lamp Life - 3000 Hours - Colour Temp - 7000 K Voltage - 120(V3) or 230(V2) vacAmps - 120 v = 1.4 amps 230 volt = 0.7 amps Flush Glass Lens - Borosilicate glass Lamp Type - MSD Metal Halide 150w Material - Aluminium Bronze and 5083 ALU Light Level - 150w 12,000 Lumens UL Ti MATE 130 FIXED-W2 (150 WATT) ORDER NUMBER-S00475-FIXED-V2 or V3 + W2 NOTE Installation Instruction: The hole cut-out should be 100-101 mm. For Lamp Maintenance allow 150mm behind the projector lid. Hull thickness range 12 to 75 mm. Electrical Information: 150w - Recommended maximum distance between ballast and projector 10m. Cable - 150w-High temperature silicone 3 core (Part No S00111-0.75). For additional information please visit our web site. For sales telephone numbers visit www.underwaterlights.com underwater lights limited DESCRIPTION This is a 150 watt MSD discharge lamp “through-hull” submersible marine light with a flush lens for the large sports fish boats, motor and sailing yachts and is suitable for GRP-fibreglass and wooden hulls. The UL Ti MATE 130 FIXED has a larger aperture than our original screwed fitting which has increased the light output by 25%. We advise that the light be installed 250mm below the minimum waterline. The boat must be hauled out for installation, although maintenance of the light is carried out from inside the hull. The light is IPX8 to 10 bar. Manufacturers of the Original underwater lights Brand Marine Lighting Products since 1991