Ömerli Mah. Arpaçay Sok. No:4 34555 Arnavutköy / İstanbul / TÜRKİYE, Tel.: +90(212) 482 41 61, E-mail: [email protected] ULTRA Flip Swivel USER GUIDE Boyut Makina San. ve Tic. Ltd. Şti. DBA ULTRA Prod

ULTRA Flip Swivel User Guide - 2 - Swivels are anchor chain connectors – connecting the chain at one end of the swivel and the anchor at the other. -The ULTRA Flip Swivel's design is unique from most other anchor swivels in that its breaking load is higher than its connected chain. -The ULTRA Flip Swivel's other difference from most other anchor swivels is that its pins cannot unwind over time like standard shackle pins. Thanks to the special form of ULTRA pin heads and sockets, the force exerted onto the swivel pins by the anchor and chain at both ends of the swivel cannot loosen the pins at...

ULTRA Flip Swivel User Guide - 4 FITTING (INSTALLATION) CONSIDERATIONS: - When the anchor eye is inserted into the large end/throat of the ULTRA Flip Swivel, the correct orientation is for the rear bridge to marry to the top of the anchor shank (or, in other words, the inverted "U" shape of the rear bridge needs to be in line with the top of the anchor shank). The ULTRA Flip Swivel MUST be orientated this way to function correctly and permit the anchor to flip into the proper position/orientation on your bow roller. Refer to the attached image as a further reference regarding this important installation...

ULTRA Flip Swivel User Guide - 6 ULTRA FLIP SWIVEL - NORMAL PERFORMANCE: ULTRA FLIP SWIVEL - FIXING HOOK / SAFETY LANYARD: - After the anchor is recovered, attaching a safety lanyard is recommended to ensure the anchor cannot deploy unintentionally. The safety lanyard can be attached to the ULTRA Flip Swivel's void between its body and anchor. Refer attached image as a further reference regarding this point. The safety lanyard should be firmly fastened to a cleat or strong end on the foredeck. MAINTENANCE: - ULTRA Flip Swivels are designed to work for many years without maintenance. However,...

ULTRA Flip Swivel User Guide - 8 - Connecting the ULTRA Flip Swivel to a non-ULTRA Anchor : It’s important to remember that most traditional anchor have slots instead of holes on their shanks. This is because historically U (or D) locks were used before the development of swivels. The technical specifications of the ULTRA Flip Swivel result in a much safer and secure connection than the same group’s U (or D) locks. However, when using the ULTRA Flip Swivel with an anchor connected through a slot on rare occasions you might find the swivel locked in an undesirable position due to movements in...