The Jockey seats
2Pages

All you need to know - Ullman Jockey seats install - use - maintain Maintenance: 1: Console design Aiming for the best console ergonomics? Visit ullmandynamics.com for full design guide lines. 2: Posture Optimal seating posture is achieved with an upright forward facing position with the head, pelvis and feet aligned vertically. Seat structure: Neoprene laminated GRP with foam padding Damper: Anodized marine grade aluminium. Stainless steel piston. (EN-AW 5083, SS.EN 1.4404 / AISI 316-L) Spring unit: Stainless steel, acid proof duplex grade. Multi composite leaf springs. Available with coating. 6: Seat layout - Lateral split Recommended lateral seat c-c measure is 600+ mm. (min 550 mm) 300 5: Seat layout - Longitudinal split Recommended longitudinal seat c-c measure is 650-700 mm. (Min 560 mm) Grab handles: Stainless steel, acid proof. Available with coating 4: Knee Clearance Recommended spacing between console and seat (front face of spring unit) = 250+ mm. Aesthetic Fresh water rinse after usage. For longest aesthetic life time, always use seat protection covers (included) when not in use or ”stay on” Cordura covers (optional accessory). 3: Seating height The Ullman Jockey are available in three stock heights. STD 750 mm (700 & 800). Always let the chosen seating height be driven by your platforms sight lines. Functional No maintenance needed. 7: Tracks A lateral c-c measure of 300 mm is the most compatible for Ullman Jockey seats. 8: Wheel position For optimal operational ergonomics, place the wheel with a 45 º (35-50º) vertical angle with an offset lateral position of 70 mm (compared to seat centre). This gives a symmetrical grip between the wheel and throttle and an upright seating position. Base: Aluminium reinforced GRP Disclaimer Driving fast at sea is always associated with significant risks, especially in high sea states. Even the best seats in the world will never be a guarantee against injuries. The enhanced control and comfort of the Ullman Jockey Seats and the Ullman Cockpit System can make you want to drive faster. Do not drive your boat faster than what feels comfortable for everyone on-board. It is your responsibility as a boat driver to keep everybody on-board safe. REMEMBER: Discomfort is a sign of dangerous exposure. Pain is a sign of threatening inju

All you need to know - Ullman Jockey seats install - use - maintain MK1 base Deck hole pattern / M8 threads Deck hole pattern / M8 threads 00-series footprint - for custom base Deck hole pattern / M8 threads 01 Series - MK1 base (Low damper placement) 00 Series - MK2 base (Flat damper placement) 00 Series - Custom base (Flat damper placement)