PRODUCT INFORMATION SKIN FITTINGS WITH TAIL Designed and made in New Zealand, Tru-Design Skin Fittings with Tail are the superior composite thru-hull solution. The Skin Fitting with Tail body and nut are moulded from glass fibre reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings. Tru-Design Skin Fittings with Tail eliminate the corrosion and electrical bonding problems associated with metallic fittings. Our Skin Fittings with Tail meet ISO International Standards giving added assurance of performance in the harsh marine environment. MODELS Part # Skin Fitting Tail 13mm ½” BSP White Skin Fitting Tail 19mm ¾” BSP White Skin Fitting Tail 25mm 1” BSP White Skin Fitting Tail 32mm 1¼” BSP White Skin Fitting Tail 38mm 1½” BSP White Skin Fitting Tail 50mm 2” BSP White Skin Fitting Tail 13mm ½” BSP Black Skin Fitting Tail 19mm ¾” BSP Black Skin Fitting Tail 25mm 1” BSP Black Skin Fitting Tail 32mm 1¼” BSP Black Skin Fitting Tail 38mm 1½” BSP Black Skin Fitting Tail 50mm 2” BSP Black Skin Fitting Tail 28mm 1” BSP White Skin Fitting Tail 28mm 1” BSP Black Skin Fitting Tail 16mm 1” BSP White Skin Fitting Tail 16mm 1” BSP Black Doc: PIS - Skin Fittings with Tail 3.2.doc LEADERS IN MARINE COMPOSITE FITTINGS

PRODUCT INFORMATION STANDARDS Tru Design Skin Fittings with tail are certified by the International Marine Certification Institute (IMCI) to meet; ISO 9093-2 Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic *Note – ½” Skin Fittings do not meet ISO 9093-2 In meeting ISO 9093-2, our Skin Fittings with Tail have been tested with a 155kg load hanging from the Tail (Skin Fitting test shown). KEY FEATURES Feature : Manufactured from a glass reinforced nylon composite High strength and light weight. Compatible with all hull types Can be used on aluminum, steel, wood or GRP hulls....

PRODUCT INFORMATION SPECIFICATIONS HULL COMPATIBILITY The Tru-Design Skin Fittings with Tail are suitable for installation in all types of hull construction; steel, aluminium, fibreglass - cored and solid, wooden sandwich. Tru-Design Skin Fittings with Tail are also able to be used on caulked solid wood hulls – care should be taken to only locate the skin fitting in the centre of any individual plank. FLOW DIAMETER & HULL THICKNESS Tail Size Maximum Hull Thickness DIMENSIONS All dimensions in mm. All dimensions nominal. Doc: PIS - Skin Fittings with Tail 3.2.doc LEADERS IN MARINE COMPOSITE FITTINGS...

PRODUCT INFORMATION INSTALLATION Full installation instructions are supplied with the Skin Fitting with Tail. It is recommended that all Skin Fittings with Tail are placed in a protected location to minimize the chance of inadvertent damage. A packer may be required to provide a flat surface on the inside of the hull. Note: Skin Fittings with Tail are not recommended for below water applications. A Skin Fitting with Ball Valve attached, or a Seacock is recommended for all below water use. Dual hose clamps should be fitted to ensure the hose does not become disengaged from the tail. Note: There...