Monitored Ball Valve
8Pages

PRODUCT INFORMATION POSITION MONITORED BALL VALVE Designed and made in New Zealand for use in marine applications above and below the water line, our Ball Valves are IMCI approved to ISO standard 9093-2, and are ideal for controlling inlet and outlet water requirements. Position Monitoring allows remote monitoring of Ball Valve Position. The Position Monitoring circuit can also be used as part of an engine or generator start interlock to ensure these don’t start without cooling water available. The body of the Ball Valve is manufactured in glass reinforced nylon composite with high impact and tensile strength resulting in a light weight unit, free from corrosion and electrolysis issues. The ball and sealing rings utilise a PTFE polymer to ensure a smooth action, and continuous ease of operation over many years. The Ball Valve is available in both BSP and NPS thread forms and can be locked in the closed position for use on toilet waste outlets. Ball Valve Position Monitored ½” BSP Ball Valve Position Monitored ½” NPS Ball Valve Position Monitored ¾” BSP Ball Valve Position Monitored ¾” NPS Ball Valve Position Monitored 1” BSP Ball Valve Position Monitored 1” NPS Ball Valve Position Monitored 1¼” BSP Ball Valve Position Monitored 1¼” NPS Internal diameter Ball Valve Position Monitored 1½” BSP Ball Valve Position Monitored 1½” NPS Ball Valve Position Monitored 2” BSP Ball Valve Position Monitored 2” NPS Ball Valves are supplied with spanner and installation instructions Panel Display Ball Valve Ball Valve Display Panel is supplied with wiring, installation instructions and marking labels Doc: PIS - Ball Valve Position Monitored 4.1.docx

PRODUCT INFORMATION KEY FEATURES Large handle for easy operation Brightly coloured handle allows easy viewing of position Able to be locked for compliance with toilet waste outlet standards Size and thread form is marked on each end of the product BSP or NPS thread form Valve position is marked for easy identification Spanner is available for easy and damage free installation Glass reinforced nylon composite construction Light weight and high strength Corrosion resistance o Long life o Minimal maintenance o No corrosion deposits to remove Electrically non conductive o No electrical bonding...

PRODUCT INFORMATION STANDARDS Tru-Design Ball Valves are certified by the International Marine Certification Institute (IMCI) to meet; ISO 9093-2 Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic In meeting ISO 9093-2, our Ball Valves have been tested with a 155kg load hanging off a hose fitting while connected to our Skin Fitting as shown. The locking feature allows the Ball Valve to comply with US Coast Guard Regulation 33 CFR 159.7 and ISO Standard 8099 for locking of toilet waste outlets. SPECIFICATIONS – Ball Valves The connecting threads on each end of the Ball...

PRODUCT INFORMATION SPECIFICATIONS – Display Panel Supply voltage The Ball Valve Display Panel is supplied with the following; Display Panel Installation instructions 2x hookup wire with connector – 2.5m (8.2’) Mounting screws and covers Sticker Sheet with the following options AIRCON INTAKE ENGINE INTAKE HOLDING TANK OUTLET PORT TOILET INTAKE STABD BAIT TANK INTAKE ENGINE INTAKE PORT HOLDING TANK OUTLET STBD TOILET OUTLET BLACK WATER OUTLET ENGINE INTAKE STBD SALTWATER WASH INTAKE BLACK WATER OUTLET AFT GENSET INTAKE TOILET INTAKE BLACK WATER OUTLET FWD HOLDING TANK OUTLET TOILET OUTLET...

PRODUCT INFORMATION DIMENSIONS All dimensions nominal. Doc: PIS - Ball Valve Position Monitored 4.1.docx

PRODUCT INFORMATION Doc: PIS - Ball Valve Position Monitored 4.1.docx

PRODUCT INFORMATION 90412 Panel Display Ball Valve Doc: PIS - Ball Valve Position Monitored 4.1.docx

PRODUCT INFORMATION INSTALLATION Full wiring instructions are supplied with the Position Monitored Ball Valve. Full installation instructions and hardware are provided with the Ball Valve Display Panel. If the valve is to be assembled to a skin fitting, ensure that the position of the skin fitting is such that it will be in a protected area, but readily accessible. Ensure threads of mating fittings have a parallel thread and it is clean and undamaged. Apply sealing tape to the thread of the Skin Fitting or Tail. Screw ball valve onto the mating fitting using the correct Ball Valve Spanner...