Photo courtesy of Semadrones - France Drone Ultrasonic Thickness Gauge

Typical Applications Shipping Bridges Storage Tanks Phone Masts Silos Lighting Columns Offshore Platforms Photo courtesy of AAA Drone Inspection - France Multigauge 6000 Drone The Multigauge 6000 Drone Gauge uses Multiple Echo technology to ignore coatings up to 6 mm thick, just the metal substrate is measured. Measurements are transmitted wirelessly in real time to a PC or laptop up to 500 metres away. The system is made up of a Gauge, Gel Dispenser and Probe Holder, all designed to be very lightweight to maintain battery power. All probes have Intelligent Probe Recognition (IPR), which automatically...

• Ignores coatings up to 6 mm thick using Multiple Echo. Coating Plus+ ignores coatings up to 20 mm. • Easily installs onto most work class drones. • Automatic Measurement Verification System (AMVS). • Wirelessly transmits measurements up to 500 m. • Works with Tritex Gel Dispenser. • Single crystal soft faced probe. • Easy calibration. • Intelligent Probe Recognition (IPR). • Free calibration for the life of the gauge. “We are writing this as a testament to the quality of performance of the Multigauge 6000Drone Thickness Gauge. Our technical team has given it high praise due its high accuracy...

Drone Probe Holder The Probe Holder has been designed to accurately present the probe onto the surface being measured. The connecting spring allows flexibility in all directions and the cone shaped guard ensures the probe is aligned flat onto the surface. A damping compression spring means the probe cannot be driven onto the surface too hard causing damage. The lightweight construction can be used with most drones. It is supplied with two 250 mm x 16 mm diameter carbon tubes to extend the probe out beyond the drones rotors. A specially designed system allows couplant to be pumped onto the surface...

Ultrasonic Thickness Gauges rely on good coupling to the surface being measured and the best option for doing this is to use a gel couplant specifically designed for the job. However, up until now, it has always been a challenge to do this when taking measurements by drone because it has to be applied before each measurement. The Tritex Gel Dispenser allows for a small amount of gel to be pumped onto the surface of the probe wirelessly by clicking a button on the Communicator software. It is connected to the Multigauge 6000 Drone gauge which receives the signal from Communicator and in turn sends...

* Figures relate to most coating types The Tritex Multigauge 6000 has been manufactured to comply with British Standard BS EN 15317:2013, which covers the characterisation and verification of ultrasonic thickness measuring equipment. Probe Holder Dimensions (Flexible Cage) It is the responsibility of the user to ensure that all equipment is securely attached to the drone prior to flight and that all flights are carried out in a safe manner by a qualified pilot. Tritex NDT cannot be held responsible for any damage caused to the drone or by the drone to any person, structure or otherwise, whilst...

Power Supply Unit 10, Mellstock Business Park, Higher Bockhampton, Dorchester, Dorset, United Kingdom, DT2 8QJ Optional: Flexible Probe Holder Tritex Gel Dispenser simple . accurate . robust