TRELLEBORG DYNAMOOR
4Pages

Catalog excerpts

TRELLEBORG MARI N E AND INFRASTRUCTURE DynaMoor TRELLEBORG DYNAMOOR To safely and securely moor a vessel, balanced loads on a ship’s mooring lines are required. With a conventional static line mooring system, the dynamic forces acting on a vessel from environmental factors, tidal or loading draft changes or from passing ships can result in unbalanced loads which can lead to parted lines and excessive vessel excursion whilst at berth. This reduces product transfer efficiency, may lead to facility downtime / asset damage or expose the jetty and ship’s crew to danger. DynaMoor combines the functionality of Trelleborg’s class leading Quick Release Hook with constant tension capabilities to pay in and out mooring lines, absorbing energy and maintaining a constant tension. DynaMoor can be used as a complete jetty solution integrated with Trelleborg’s traditional QRHs, or deployed as a separate system working independently of a ship’s mooring lines and winches. SmartPort by Trelleborg is a technology platform that connects disparate, data-driven assets, giving stakeholders a holistic view of operations to power communication and decision making. Combining Trelleborg’s class leading Quick Release Hook with an innovative dual mode mooring line tensioning system to bring forward the next generation of mooring solutions. Benefits ❙ Dampens vessel motions to allow product transfer in a greater range of environmental conditions. ❙ Passive & constant tension damping modes of operation. ❙ Real-time load monitoring of mooring line tension. ❙ Quick release and remote release capabilities. ❙ Integrates with other Trelleborg docking and mooring products and environmental monitoring systems. ❙ Integrated with Trelleborg “SmartPort” data monitoring and reporting services. ❙ Does not require other mooring equipment such as bollards for mounting and set-up. ❙ Can use ship’s mooring lines or shore-based dedicated lines to apply tension. ❙ Integrated fairlead to allow greater range of mooring line angles. ❙ Self-contained mooring units with all motors, features and functions within. ❙ Hazardous area operation capability. Certified Management System DAM-CTH-01 Ver 1.3 Trelleborg Marine Systems’ commitment to continuous product improvement means that we reserve the right to upgrade and modify equipment and systems without notice as technolog

Open the catalog to page 1

The integrated fairlead simplifies the mooring arrangement and eliminates reliance on bollards for connection to the jetty. There is also no need for complex pulley systems to route the mooring lines to the vessel. DynaMoor is designed to accommodate the full safe working load as an integrated mooring fixture and tensioning system. Model shown includes optional capstan This improves safety through minimizing “snap back” zones on the wharf. The simplified mooring arrangement also greatly improves efficiency of mooring operations by reducing the time taken to secure the vessel at berth. In...

Open the catalog to page 2

Safe Working Load 150T DynaMoor Control System Quick Release Hook (QRH) Key Standard Features Constant Tension System Constant Tension Frame Built-in HPU with Accumulator Optional Features Electric Capstan 1.5T - 3T line pull DYNAMOOR CONTROLS Constant Tension Mode 2.1 Operational Modes Passive Tension Mode 2.2 Control Stand 2.3 Incoming Connections Selector Switch: Manual / OFF / Automatic Pushbuttons: Load Inc / Load Dec / Acknowledge Indicators: Running / Fault Emergency Stop: Push to set, twist to reset Cable Entry - 25mm

Open the catalog to page 3

Hook Construction Frame (side plates): Carbon Steel ASTM A572 Grade 50 equivalent to AS 3678 Grade 350 Hook body, main pivot block, primary release block: cross shaft are high strength alloy steel to ASTM A148, equivalent to AS 2074. Spark Prevention The hook assembly is fitted with three elastomeric impact blocks for energy absorption. Material: polypropylene. CONSTANT TENSION SYSTEM Non-Hazardous Areas – Stainless steel GR316, IP66 Hazardous Areas – Epoxy coated aluminium alloy, Zone 1 IIB, IP66 Incoming Connections Power Entry – 32mm Control Stand – 25mm Communications Entry – 25mm...

Open the catalog to page 4