LR
1Pages

Part Number Replacement Needles 6 x sets of 28 Needles 203mm Long Chisel with 100mm Wide Blade Floor tile removal Chisel Holder Assembly 5/8” Hex Converts the Long Reach needle scaler into a Long Reach Chisel Scaler 229mm Long Chisel with 50mm Wide Blade Spark resistant aluminium bronze for use in hazardous areas Whip Hose & Oiler Assembly Consists of whip hose, and ¼’’ lubricator 229mm Long Chisel with 25mm Wide Blade Flat chisel for sand cast chipping Whip Hose Consists of air hose ¼’’ BSP claw - 2m 203mm Long Chisel with 100mm Wide Blade General chipping applications, asphalt cutter, paint removal Whip Check Non spark options available 229mm Long Chisel with 50mm Wide Blade Removal of linoleum from floor base 446.1035 The Long Reach range is designed to make the operator’s life easier when scaling and cleaning hard to reach areas such as tanks. 203mm Long Chisel with 100mm Wide Blade Spark resistant aluminium bronze for use in hazardous areas Available in a range of lengths from 2 ft up to 6 ft, long reach tools are perfect for a wide number of applications. A full range of chipping, scaling and scraping attachments make it an indispensable tool for any structural cleaning operation. Service kit contains: 3mm Needle Holder (1 each), 3mm Needle Chisel (28 each), Anvil (1 each), Piston (1 each), Valve Stem (1 each), Spring Return (1 each), Spring Valve (1 each), Throttle Lever (1 each), Valve Seat O’Ring (1 each), Valve Cap O’Ring (1 each), 3BLR O’Ring 34.6x1.78 (1 each), 3BLR O’Ring 37.8x1.78 (1 each), Spring Pin (1 each) Note: Please see page 58 for the full range of replacement needles Note: Please see page 59 for the full range of Chisel / Scraper attachments for the Long Reach Scalers. The aluminium Long Reach “Lite” makes working overhead or while reaching easy, it is quite literally a back saver. Part Number TECHNICAL DATA Model Needle Quantity • ange of sizes for performance and versatility R • ide range of consumables for multiple W applications • ptional beryllium copper needles for use in O potentially explosive environments • rgonomic design for operator comfort E • imple maintenance with no special tools required S for reduced downtime 4ft LITE Needle Scaler 5ft LITE Needle Scaler 6ft LITE Needle Scaler Symbol denotes aluminium bronze chisels for use in potentially hazardous areas. V I NY L W RA PP I N G • teel and aluminium body versions S APPLICATIONS • emoval of coatings, corrosion and other R accumulated materials • leaning concrete prior to repair C Rust Removal Render Removal Paint Removal • leaning mixers, formwork and machinery a