KAV30
1Pages

• ptional certified type H version O • upplied with conductive tool kit S • ptional wet use version O 38mm Multipurpose Tool with Brushes 14’’ Permaflow Filter (Optional) 38mm x 125mm Dusting Brush Antistatic option 14’’ Float Assembly - Wet use Antistatic option 38mm Stainless Steel Taper Tube For joining hoses HEPA filter (Optional) Antistatic option K4 Disposable Bags - Pack of 10 For disposing of sealed waste such as hazardous dust 38mm Dry Tool Kit Antistatic option 5 x K4 Microfibre bags For dry use applications 14’’ Standard Filter Assembly Antistatic option TECHNICAL DATA Model Part Number Capacity (litres) Dry models complete with: • 8mm Tool kit (Part No. 303.1085/AS) 3 • 4” Standard filter assembly (Part No. 303.1025/AS) 1 • x K4 Microfibre bags (Part No. 303.1003) 5 Dry Type H models complete with: • 8mm Tool kit (Part No. 303.1085/AS) 3 • 4” Standard filter assembly (Part No. 303.1025/AS) 1 • x K4 Microfibre bags (Part No. 303.1003) 5 D U ST CON T RO L Wet & Dry models complete with: • 8mm Tool kit(Part No. 303.1095/WD) 3 • 4” Antistatic Float Assembly (Part No. 303.1050/AS) 1 • 4” Standard filter assembly (Part No. 303.1025) 1 • x K4 Microfibre bags (Part No. 303.1003) 5 Trelawny recommends an optimum air pressure of 6 bar for maximum efficiency ** ATEX Directive 99/92/EC - referring to health and safety of workers that might be at risk from explosive atmospheres. Classifies hazardous areas into zones which for dust range from zone 20 (combustible dust present continuously or for long periods); through zone 21 (combustible dust likely occasionally) to zone 22 (combustible dust not likely to occur, or for a short period). ** ATEX approved vacuums for use in gas zone 1 and dust zone 21 are available, please ask our sales team for details ** It is the end user responsibility to ensure & maintain a good earth bond at the air connection point ** HEPA - High Efficiency Particulate Air - filter for collection of hazardous dust • TEX certified with certificate A 38mm Wet Tool Kit Antistatic option 38mm x 3m Hose Antistatic option The K series range of industrial dust collector form an integral part of Trelawny’s TVS®, Tool and Vacuum System, for our range of smaller hand held surface preparation equipment. Uniquely available with a fully conductive accessory kit, stainless steel canisters mounted on a stainless steel caddy fitted with conductive braked castors and wheels. Each machine is issued with an earth path continuity certificate and where applicable the Type H versions include a filtration test certificate. Part Number The K series range of industrial dust collectors form an integral part of Trelawny TVS® (Tool and Vacuum System). The KAV30 is ATEX approved for Gas zone 1 and Dust Zone 21 under category 2 of the ATEX directive. Part Number • uitable for use with Trelawny’s TVS® range of S handheld scaling tools • ollection of dust in hazardous environments C categorised under category 2 of the ATEX directive Use with SF11 Use with Needle Scalers Use with Peening Preparation Tool