Catalogs >
Transfluid >
KPT VARIABLE FILL FLUID COUPLINGS

KPT VARIABLE FILL FLUID COUPLINGS
4Pages

Catalog excerpts

VARIABLE FILL FLUID COUPLINGS

FLUID COUPLINGS KPT SERIES The KPT is a variable fill fluid coupling designed to be a start up drive or a variable speed drive. The KPT has an externally driven oil feeding pump and a remote electrically operated ON-OFF valve. When the valve is turned ON, the fluid coupling circuit is fed, when it is turned OFF, rapid oil drain occurs through orifices located on the periphery of the coupling. The forced bearing lubrication is continuously assured. The KPT control is achieved by on/off solenoid valve modulation or oil flow control valve (4-20mA signal) to obtain more accurate start up...

Open the catalog to page 2

Flexible coupling Gear coupling KPTB with flexible coupling C2 KPTB with gear coupling C3 KPTE* pulley version C4 C5 * For admissible radial loads refer to TF 6093-A Dimensions can be changed without notice Variable fill fluid coupl

Open the catalog to page 3

Tables for the preliminary selection of the coolers: - KPTB with single oil pump (with flow control valve if used as variable speed drive) - Refer to variable speed drive or start up drive column - Max power = max power absorbed at max speed - Output water temperature 35°C Variable speed application Fluid Coupling max. power (kW) Water - Oil Cooler Model Required Water Flow (l/min) at 25°C Start-up application Fluid Coupling max. power (kW) Water - Oil Cooler Model Required Water Flow (l/min) at 25°C • Tube bundle heat exchanger • • Plate heat exchanger TRANSFLUID BEIJING TRADE CO. LTD...

Open the catalog to page 4