HF - MFO POWER TAKE OFF
5Pages

{{requestButtons}}

Catalog excerpts

HF - MFO POWER TAKE OFF - 2

HF - MFO POWER TAKE OFF HFR - FOR SIDE LOAD AND IN-LINE SELF SUPPORTING DESIGN ELIMINATES SIDE LOADS ON THE ENGINE FLYWHEEL OIL / AIR ACTUATION • remote control operation by push button engagement • self adjusting; no operator adjustment required UNIQUE CLUTCH DESIGN • compact design • high torque capacity • eliminates the engine flywheel pilot bearing (HFO) • no side load on flywheel (HFR and MFO) • SAE standard interface • dust proof for harsh environmental conditions • simplified service in case of discs replacement • easy installation • Kevlar friction discs (with the exception of...

Open the catalog to page 2
HF - MFO POWER TAKE OFF - 3

HFR OIL/AIR ACTUATED POWER TAKE OFF Heat exchanger only on HFR 314 - 318 Rotary union protection Support plate (see TF6229) HFO OIL ACTUATED POWER TAKE OFF High radial load capability Dimensions SIZE V Support palte (see TF6229) not required for HFR 210-211-311 MAX INPUT TORQUE KEVLAR (at 12 bar) Nm MAX INPUT TORQUE STANDARD (at 12 bar) Nm THERMAL CLUTCH CAPACITY Q OUTPUT BEARING LUBRIFICATION CENTER OF GRAVITY G dimension MAX INPUT TORQUE KEVLAR (at 25 bar) Nm MAX INPUT TORQUE STANDARD (at 25 bar) Nm THERMAL CLUTCH CAPACITY Q OUTPUT BEARING LUBRIFICATION CENTER OF GRAVITY G dimension – For...

Open the catalog to page 3
HF - MFO POWER TAKE OFF - 4

SELECTION GUIDE trasmissioni industriali oil/air supply 12 bar in-line and side load application HFO Oil for HFO • By customer hydraulic circuit • By MPCB R5 with hydraulic control block, through continu- ous monitoring of some parameters proper transmission operation is assured. Any abnormal condition is promptly detected and countermeasures quickly enforced to protect the transmission as well as the engine By oil/air power pack: a compact power system which delivers either oil or air with suitable pressure By MPCB R5 with oil power pack only for HFO oil supply 25 bar side load application...

Open the catalog to page 4
HF - MFO POWER TAKE OFF - 5

STEP 3 - PERMISSIBLE SIDE LOAD CHART 3 Calculated bearing life over 5000 hours Rim speeds over 35 m/s, the dynamic balancing of the pulley is recommended Timing belts must be approved by TRANSFLUID “X” distance is according to belt type & number Service Factor Chain or gear drive Life Factor Actual applied side load “T” Medium-low side load (hydraulic belt tensioner) High-medium side load D : pulley pitch diameter (mm) kW : gross engine power (kW) n : (rpm) S : service factor L : life factor IMPORTANT NOTICE Disregarding system torsional compatibiliy could cause damage to components in the...

Open the catalog to page 5

All Transfluid catalogs and brochures

  1. Battery pack

    4 Pages

  2. STELLADRIVE

    8 Pages

  3. KPTO

    4 Pages

  4. KSL

    8 Pages

  5. TOWERCLUTCH

    5 Pages

  6. High Speed

    5 Pages

  7. RBD

    7 Pages

  8. KX

    4 Pages