TRANBERG CONTROL PANEL TEF 4720 NAVIGATION LIGHTS CONTROL PANEL SINGLE LANTERN INSTALLATION, 24V SYSTEM SAFE AREA Subject to change without prior notice TPS2018 REV. A 30.06.2017 • Navigation lights control panel for the TEF 2840/TEF 2870 Lanterns, 24V power supply For console mounting Easy installation (all terminals are separated from control box with a 1 meter flexible conduit) Prepared for connection of two 24 V AC/DC power supplies The lanterns are switched by two pole, rocker switches on the front panel. Dimmable LED’s indicate when a lantern is on Visible and audible alarm. Voltage drop in long cable length can be a problem. This is compensated by connecting specific circuits to a higher voltage than 24V. Transformers delivered by Tranberg AS have output for six different voltages Tranberg AS can assist calculating voltage loss in cable to lantern. Navigation lights control panel for the TEF 2840/TEF 2870 Lanterns, 24V power supply Control panel series TEF4720 are designed to switch and fuse navigation and signalling lights on all kinds of ships. Panels are approved and certified by DNV. Panels are offered in three different versions, for 8, 12 and 16 lanterns. Material: Anodised aluminium with engraved text, specified by customer Supply voltage: 2 x 24V AC/DC Max. Power consumption: 340 W ( 8 circuits ) Load: Filament lamps / Cut out dimensions (12 and 16 circuits): 124 x 364 mm Equipped with an ’’alarm-relay” with potential free contact set for remote monitoring Test button for testing of LED’s and acoustic alarm. R. Stahl Tranberg AS E [email protected] | stahl-tranberg.com Main office: Strandsvingen 6 | N-4032 Stavanger | Norway | T +47 51 57 89 00 | F +47 51 57 89 50 Office Oslo: Luhrtoppen 2 | N-1470 L0renskog | Norway | T +47 24 08 44 10

Navigation light control panel for 8 circuits Navigation light control panel for 12 circuits Navigation light control panel for 16 circuits SPARE PARTS Test button Power supply / alarm card P40 5029 0089 Fused terminal block DIMENSIONS & WIRING Lanterns 24V / 25 - 40W Compensation of voltage drop in long cables. The control panel is prepared to connect specific lantern circuits to a different voltage than 24 volt, for compensation of voltage drop in long cables. The transformers delivered by Tranberg A.S are arranged with output for six different voltages. NOTE: Operational voltage must...