1. Catalogs
  2. Top Marine OÜ
  3. Swimming Pontoon with Plastic Floats

Swimming Pontoon with Plastic Floats

Swimming Pontoon with Plastic Floats

Swimming Pontoon with Plastic Floats

Product catalog summary
Overview: The document provides technical specifications and features of a swimming pontoon with plastic floats, designed for use in swimming areas and beaches. It highlights the modular construction, ease of transport and installation, and moderate bearing capacity.
Specifications:
  • Dimensions: Lengths range from 4m to 6m, widths from 2.0m to 3.0m, and a consistent height of 0.43m.
  • Floats: Each pontoon uses 220-liter plastic floats, resistant to UV radiation and freezing.
  • Load Capacity: Varies from 0.52 kN/m² to 1.18 kN/m², with a designed load capacity ranging from 632 kg to 1448 kg.
  • Weight: The weight of the pontoons ranges from 192 kg to 393 kg.
  • Environmental Conditions: Maximum wave height of 0.2m and current speed of 1 m/sec. Pontoons need to be dismounted during winter.
Connection and Anchoring Options:
  • End, side, L, and T connections available.
  • Anchoring systems include chain anchoring with Ø10 mm chains and pile anchoring with Ø60 mm piles.
Accessories:
  • Mooring rings, fenders, swim ladders, safety equipment, and railings are available.
  • Timber decking is made from impregnated softwood with anti-slip properties.
  • Swimming ladders are available in 4 or 7 steps, made from galvanized or stainless steel.
Construction Details:
  • Timber frame made from planed timber beam, impregnated using vacuum pressure method, class HC4.
  • All bolts and fittings are fully hot dip galvanized.
  • Plastic floats are roto-moulded from Polyethylene (PE).
Additional Features:
  • Flexible rubber joint connections for strong and reliable assembly.
  • Concrete abutment for secure installation.
Note: Top Marine reserves the right to revise or amend the product catalogue without notice.
See more

Catalog excerpts

Swimming Pontoon with Plastic Floats-1

Swimming Pontoon with Plastic Floats Top Marine Floating Marina Installations Swimming Pontoon Technical Data of the Swimming Pontoon with Plastic Floats Item code Revision date 01.01.2019 Top Marine is a continuously developing firm and may at its sole discretion revise or amend this product catalogue without further notice. Tule 33, Saue 76505 ESTONIA [email protected] www.topmarine.eu Swimming Pontoon with Plastic Floats

 Open the catalog to page 1
Swimming Pontoon with Plastic Floats-2

Swimming Pontoon with Plastic Floats GANGWAY - Timber gangway; - Possibility of railings. TIMBER DECKING - Impregnated softwood anti-slip decking 28x120mm. ABUTMENT - Concrete abutment; - Swimming pontoon abutment on screw piles. CHAIN ANCHORING SYSTEM - Robust chain fixing set hot dip galvanized. PILE ANCHORING SYSTEM - An alternative solution for chain anchoring; - Has been designed for piles Ø60 mm; - The designed pile load is 1 kN. FLEXIBLE RUBBER JOINT CONNECTION - Strong and reliable rubber-bolt joint connection; - Connects boat pontoons into one single unit. FENDER - Protects timber pontoons...

 Open the catalog to page 2

All Top Marine OÜ catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.