Boat Pontoon with Plastic Floats

Product catalog summary

Overview: The document provides technical specifications and features of a Boat Pontoon with Plastic Floats, designed for inland waterway boat harbours. It highlights the construction, mooring systems, and accessories available for the pontoon.

Specifications:

Plastic Floats: 450-liter capacity, roto-moulded from Polyethylene, filled with expanded polystyrene, UV and freeze-resistant.
Timber Decking: Anti-slip, planed blanks (28x120 mm), strength C16, impregnated class HC4.
Timber Frame: Planed timber beam (70x195 mm), strength C24, impregnated class HC4.
Dimensions: Width 2.4 m, Length 6.0 m, Height 0.82 m, with varying numbers of floats and load capacities.

Mooring Systems:

Chain Mooring: Uses hot dip galvanized chain.
Pile Mooring: Designed for piles Ø110-200 mm, with a design pile load of 10 kN.

Connection Options: End, side, L, and T-connections using strong rubber-bolt joints.

Accessories: Mooring rings, boat booms, fenders, swim ladders, safety equipment, and railings.

Technical Data:

Freeboard: Ranges from 0.65 m to 0.73 m depending on the model.
Load Capacities: From 0.9 kN/m² to 2.7 kN/m².
Weight: Varies from 406 kg to 544 kg.
Allowed Max Wave Height: 0.2 m.
Max Boat Dimensions: Length up to 9.1 m (30 feet).

Additional Features: The pontoon is easy to transport and install, with a high bearing capacity and designed for year-round use.

Revision Date: 1 January 2016. Note that Top Marine may revise or amend the product catalogue without notice.

Catalog excerpts

Floating Marina Installations Boat Pontoon with Plastic Floats BUREAU VERITAS Certification

Open the catalog to page 1

Boat Pontoon with Plastic Floats ABUTMENT - Concrete abutment; - Abutment on screw piles. TIMBER DECKING - Planed anti-slip blanks 28x120 mm; - Strength C16 according to EN 338 standard; - Impregnated (vacuum pressure method), class: HC4. GANGWAY - Timber gangway; - Possibility of railings. CHAIN MOORING SYSTEM - Mooring with hot dip galvanized chain. PILE MOORING SYSTEM - An alternative solution for chain mooring; - Has been designed for piles Ø110-200 mm; - The design pile load is 10 kN; - Large and robust construction; - Flexible rubber joints. FLEXIBLE RUBBER JOINT CONNECTION - Strong and...

Open the catalog to page 2

Boat Pontoon Technical Data of the Boat Pontoon with Plastic Floats Item code Revision date 1 January 2016 Top Marine is a continuously developing firm and may at its sole discretion revise or amend this product catalogue without further notice. Tule 21, Saue 76505 ESTONIA [email protected] www.topmarine.eu

Open the catalog to page 3

Boat Pontoon with Plastic Floats

Boat Pontoon with Plastic Floats

Catalog excerpts

All Top Marine OÜ catalogs and brochures