TL3 SERIES
1 / 7Pages

Product Segments • Care Motion • Ergo Motion TiMOTION’s TL3 series columns are designed with an extruded aluminum square appearance, primarily for use in medical applications. Our high capacity, economical TL3 provides stable vertical lifting. This makes the engineering design process easier and safer by replacing older style lifting mechanisms that use many moving parts and have pinch points. The 3 stage telescopic design enables a greatly reduced retracted height and provides an increased stroke length while ensuring a high degree of stability. General Features Maximum load Maximum speed at full load 24.0mm/s (with 1,000N in a push condition) Minimum installation dimension Stroke/2+150mm Dimension of cross section Operational temperature range

CODE Rated Load Self Typical Typical Speed 1 The above are the speed and current information under pushing condition. 2 Speed would be the same if with 12V motor, but with double current consumption. Performance Data Thrust vs. Speed & Current 1 The performance data in the curve charts shows theoretical value only.

Thrust vs. Speed & Current Thrust vs. Speed & Current Performance Data Note 1  The performance data in the curve charts shows theoretical value only.

Thrust vs. Speed & Current Thrust vs. Speed & Current Performance Data Note 1  The performance data in the curve charts shows theoretical value only.

Standard Dimensions Minimum installation dimension + Stroke Minimum installation dimension Retracted Length Cable Exit from Front End Cable Exit from Rear End

Customzied screw Top bracket Spring Washer Installation Guide Bottom bracket ed screw screw TopTop bracket bracket ttom bracket m bracket Installation Guide of Top Bracket Bottom Bracket Installation Guide 22.5 Aviod thethe cable layout thisthis hole Aviod cable layout by by hole 22.5 Note 1  he thickness of the bottom bracket is no less than 6mm; the suggestion size is 6~8mm. T 2  hile placing sample or formal orders, please adivse specially if you don’t need “spring washer” and/or “customzied screw”. W Or, we’ll use the suggested parts. 3  here is a hole on the top of bracket. It designs...

Cable Exit Location 1 = From front end (removable cable set) 2 = From rear end (the cable set fixed on TL3) Note : if one chooses option #1 (removable cable set), one must place an order for the cable specifically; besides, one must choose cable length option #0 (without cable). Special Functions for Spindle Sub-Assembly Functions for Limit Switches 1 = wo switches at the retracted/extended positions to cut current T 3 = wo switches at the retracted/extended positions to send signal T A = Customized Note : please follow the standard installation. Output Signals Note : if one chooses “cable...