TA2-series
4Pages

{{requestButtons}}

Catalog excerpts

TA2-series - 1

Product Segments • Auto Motion The TA2 series is a compact, fully sealed, powerful linear actuator that works well in the most demanding applications. The TA2 is perfect for use in small spaces without sacrificing power or capability and is available with options such as feedback, signal sending limit switches, 90 degree clevis mounting, etc. The wide variety of applications include construction machinery, ventilation systems, food and beverage automation…etc. General Features Voltage of motor Maximum load Maximum speed at no load Maximum speed at full load Minimum installation dimension stroke+105mm(without output signals) Minimum installation dimension stroke+135mm(with output signals) Color silver Certificate POT, Optical, Hall/Reed sensor(s) Compact size for limited space

Open the catalog to page 1
TA2-series - 2

Dimension without Output Signals Retracted Length Retracted Length Dimension with Output Signals Retracted Length Retracted Length Rated Load PUSH N Load and Speed CODE Self Locking N (PUSH) Typical Current at Rated Load (A) Typical Speed No Load (24V DC) mm/s 1  he left diagram shows the T speed and current figures under pushing condition. 2  peed would be the same if S with 12V motor, but with double current consumption comparing 24V motor. The user is responsible for determining the suitability of TiMOTION products for a specific application. 3  he self locking force above T need to work...

Open the catalog to page 2
TA2-series - 3

Minimum Retracted Length Without Output Front Attachment 1,2 with Rear Attachment 1,2,3 Front Attachment 1,2 with Rear Attachment 4,5,6 Front Attachment 3,4,5 with Rear Attachment 1,2,3 Front Attachment 3,4,5 with Rear Attachment 4,5,6 With Output Additional retracted length TA Series Safety Additional Additional Stroke Limit Stroke Invalid Length Above stroke recommendation is based on safety stroke limit, for each additional 50mm stroke, it needs to add 5mm for the retracted length. If TA2's stroke is 201mm, the retracted length = 201mm+invalid length+5mm. If TA2's stroke is 300mm, the...

Open the catalog to page 3
TA2-series - 4

Load and Speed See appendix Retracted Length See appendix Note : before selecting retracted length, please refer to the additional retracted length chart Rear Attachment Front Attachment Limit Switches Output Signals 1 =Two switches at the retracted/extended positions to cut current 2 =Two switches at the retracted/extended positions to cut current with the third one in between to send signal 3 =Two switches at the retracted/extended positions to send signal positions and the third one in between Cable Length

Open the catalog to page 4

All TiMOTION Technology catalogs and brochures

  1. TL7 SERIES

    4 Pages

  2. TL6 SERIES

    4 Pages

  3. TL5 SERIES

    3 Pages

  4. TL4 SERIES

    4 Pages

  5. TL3 SERIES

    7 Pages

  6. TA4-series

    4 Pages

  7. TA3-series

    6 Pages

  8. TA2P-series

    4 Pages

  9. TA1-series

    4 Pages