TIKAL BASIC Epoxy resin Use: Universally applicable epoxy resin Varnishing work with glass, carbon and aramid fibers Premium glue and adhesive bonds as well as putty work on nearly all backgrounds Characteristics: - good networking - high-strength hardening - vapor diffusion-tight - hardening in a large temperature area - high UV resistance - minimal surface saponification - good grindability Laminator hardness Delivery sizes: Combination pack (A+B) 1.20-kg A 3.50 kg / B 0.75-kg Large container upon request Color: light yellow Product line: 4 656 35 4 656 07 4 656 10 A components B components combination pack A + B 3.50 kg 0.75 kg 1.20 kg TIKAL BASIC is a low-viscous, transparent and universally applicable epoxy resin. TIKAL BASIC eignet sich für Laminierarbeiten mit Glas-, Carbon- und Aramidfasern und härtet zu einem hochfesten Bauteil aus. TIKAL BASIC is suitable for varnishing work with glass, carbon and aramid fibers and hardens to a high strength component. Blended with appropriate fillers (TIKAL GF, TIKAL MICROBALOON), TIKAL BASIC is also suited for premium glue and adhesive bonds as well as putty work on nearly all backgrounds. Form: Color: Flash point: Specific density (20 °C): Dyn. viscosity (25 °C): Mixing ratio: Full hardening: Processing temperature: liquid light yellow > 150 °C 1.13 g/cm3 500 bis 900 mPas 4 : 1 (volume) 4.7 : 1 (weight) 24 h (depending on temperature) +5 °C to max. +30 °C