SHAFT SEAL BROCHURE
12Pages

SHAFT SEALS

Before Ordering SureSeals™ are sold as a kit with hose and clamps. To determine which parts to order and whether or not you have sufcient space for the installation, you need to measure “A”, the shaft diameter and “B”, the O.D. of the stern tube (which corresponds to the hose I.D.). In addition please advise dimension “C” to conrm how much CLEAN, SMOOTH shaft forward of the stern tube is available for locating the unit. Please also conrm what material your propeller shaft is manufactured from. In twin-engine applications, SureSeals™ are normally supplied with a “second injection tting” to...

Self-Aligning Shaft Seals SureSeal™ Tides Marine SureSeal™ System Tides Marine SureSeal™ is the market leader in dripless propeller shaft sealing systems. SureSeal™ has become an industry standard t on many production-built power boats, yachts and commercial craft. The Tides Marine SureSeal™ system is a water tight, self-aligning shaft seal. The one-piece bre-reinforced composite housing consists of a water lubricated PTFE shaft alignment bearing and lip seal. Once the bearing is on the shaft, the risk of misaligning the SureSeal™ is reduced. The housing is connected to the stern tube by...

SureSeal™ Self-Aligning Shaft Seals SureSeal™ Standard Sizes - IMPERIAL The shaft / stern tube diameter combinations normally available from stock are listed. Additional shaft diameters and stern tube hose options are available on request. * Stern tube hoses (0 D) for 2.125", 2.750", 2.875" and 3.125" are supplied with straight wall silicon hose.

Self-Aligning Shaft Seals SureSeal™ SureSeal™ Standard Sizes - METRIC The shaft / stern tube diameter combinations normally available from stock are listed. Additional shaft diameters and stern tube hose options are available on request. * Stern tube hoses (0 D) for 54mm, 70mm, 73mm and 79mm are supplied with straight wall silicon hose. www.tidesmarine.com TIDESMARINE

SureSeal™ Self-Aligning Shaft Seals Spare Seal Carriers The Tides Marine Spare Seal Carrier Kit provides a convenient way of storing a replacement lip seal on the propeller shaft during installation of the SureSeal™. This allows the change of a damaged or worn lip seal without uncoupling the shaft from the transmission. If necessary, the lip seal can be replaced with the craft aoat. The Spare Seal Carrier is a two-piece, non-metallic housing, which is clamped to the propeller shaft in front of the seal head. Carriers up to 1.75" / 45mm contain a single lip seal, whilst carriers 2" / 50mm...

Self-Aligning Shaft Seals SureSeal™ Replacement Lip Seals for Tides Marine Shaft Seals All Lip Seals Supplied with an Installation Hat www.tidesmarine.com TIDESMARINE

SeriesOne™ Self-Aligning Shaft Seals Product Overview Designed for use on smaller vessels with stainless steel propeller shafts, the seriesOne™ shaft seal is designed to fit shaft diameters from 3/4" through 1-1/4", in 1/8" increments. It is also available to fit metric The seriesOne™ shaft seal is to be used in single-engine vessels only. For twin- engine applications, the SureSeal™ is Key design features of the seriesOne™ shaft seal include: Housing: The one-piece body is manufactured from an engineering-grade Bearing: The bearing is machined to precise tolerances providing reliable,...

Self-Aligning Shaft Seals SeHesOne™ seriesOne™ Standard Sizes The shaft / stern tube diameter combinations normally available from stock are listed. Multi-convolute hose option shown * Supplied with 1.5" / 38mm Adaptor. www.tidesmarine.com TIDESMARIN

Water Pick-Up Kits Product Overview Tides Marine Water Pick-Up Kits include everything needed to connect SureSeals™ to source water necessary for proper lubrication of the lip seal and bearing. There are two types of kits available: "Tee Kits", which are used to tap into the flexible cooling hoses, and "Fitting Kits", which are used to tap into fixed points in the raw cooling system. Tee Kits: Brass tees are designed to fit a wide range of hose sizes and have branch fittings matched to those found on each Fitting Kits: Fitting Kits contain a brass water fitting (matched to fit the water...

Heat Exchanger Water Pump Water Fitting Recommended Water Pick-Up Points Hose Tee: In-line between the heat exchanger and riser (as close to the heat exchanger as possible). Hose Tee: In-line between the oil cooler and the heat exchanger. Hose Tee: In-line between the water pump and the Drain Plug: Back of the water pump. Be sure the drain is on the pressure side of the pump. Drain Plug: In the heat exchanger. Drain Plug: In-line oil cooler (if oil cooler is on the pressure side of the pump). The bore should be at www.tidesmarine.com TIDESMARINE

Sail Track System Toll Free Phone: (800) 420-0949 Tides Marine - Italia Tides Marine International - UK Unit C5 Birch Copse Technology Road, Cabot Lane Poole, Dorset Tides Marine - Australian Agent New South Wales, Australia Tides Marine International - Spain spain ©tidesmarine.eu Tides Marine - Polska