Catalogue - ThorMarine
69Pages

steel watertight doors aluminium watertight doors A 60 rated fire doors

Since 1997, the year that THORMARINE was founded, we have grown to a major manufacturer and supplier of products and services for the maritime industry with sales activities through out the world. We offer a wide range of doors, hatches, manholes and windows for the boatbuilding, shipbuilding and offshore industry. We manufacture Lloyd's type approved watertight aluminium and steel doors and hatches, and a wide range of custom build DIN clip doors and hatches. All of them available with a wide range of options. Watertight doors are available to withstand a water pressure of up to 10 mtr/Wc....

Tank, deck and escape hatches THORMARINE +31 (0)50-5274003 +31 (0)84-7203498 WWW.THORMARINE.EU Individual and central closed hatches All hatches are produced according customer sizes combined with our experience Standard with: Sigmaweld MC weld primer Various sizes, various types of frames and coamings Central closed or individual closed by DIN clips Various hinges: flush hinges, DIN hinges, spring loaded hinges etc. Individual closed DIN clips Central closed tank hatch Stainless flush DIN clip Hatch wing nuts Aluminium hatches Hinges All hatches available in aluminium and mild steel Van...

Series 24 watertight doors Watertight aluminium doors Doors are all custom build, with various sizes, and supplied including frame, ready to fit Standard with: bolt or weld frame, R=150 or mittred corners anodized or powder coated frames and doorleaves 4 mm aluminium door leaf and 2 mm cover dogs, hinges, handles and link bar system all stainless Locks, doorholders, trims, windows etc. Door can be built as double leaf door

Aluminium and steel doors THORMARINE +31 (0)50-5274003 +31 (0)84-7203498 WWW.THORMARINE.EU Central closed and DIN clip watertight doors All doors and hatches are produced according customer sizes and are Lloyd’s approved. Standard with: Sigmaweld MC weld primer Angle bar frame 75 x 50 x 7 mm HIP = Clear opening + 75mm Radius in superstructure 137,5 Adjustable M-20 hinges with grease nipple 6 or 8 mm steel door leaf Stainless steel handles and quick pin locking We produce these doors to withstand a waterpressure of 7,5 meters of waterhead Options: central closed doors Aluminium frame and...

Certified by: GL-CE number 42842-02 Lux, ABS etc. I nel. Lock, handles and plates DIN 18250 Galvanized and primed steel door leaves and frame Z-profile frame around the door, various sills Stainless materials for doorleaf, frame, handles and hinges Dorma doorcloser, concealed hinges Various locking systems, ventilation grills, paint systems and foils Door can be built as sliding door or double door Extra seal for weathertight, in or excl. extra cleats / dogs._

Series A-60 offshore doors Off shore en escape doors door with recessed stainless handle Standard with: 3 mm Zprofile frame for bolting, provided with seal for spray and gastightness Both sides 2mm galvanized doorleaf with 50mm insulation Door and frame painted with 1 layer primer, RAL colour available at additional cost 3 stainless steel hinges complete with lock and stainless steel handles and sheelds door with stiffeners inside Lightmetal panic bar, stainless steel optional Stainless recessed handle

Escape and inspection hatches Flush deck hatches operable by key or T handle All hatches are standard round, oval or square Standard with: galvanized casted steel or aluminium cover, deck ring made of Stainless, aluminium or lift out or hinged, hinged available with coaming quick acting hatch with 4 dogs, or strongback round lift out: clear opening: 356, 406, 457, 508 and 610 mm round hinged: clear opening: 559 mm oval lift out or hinged: clear opening: 381 x 610 or 343 x 521 mm key: galvanized steel, build in T handle stainless or bronze_ CAST STEEL TEST RESULTS Hand wheel below All...

Handhole & Manhole covers Manhole covers and handholes All our manhole and handhole covers are made of steel, aluminium or Stainless steel (on We supply rond or oval covers, complete with deck ring. Deck rings are flush or non flush Covers are supplied with seal and bolts and nuts. Ring and cover are shotblasted SA 2.5 and primed with 1 layer Sigmaweld MC Most covers can be supplied from stock.

This drawing and design it protected by copyright and the information is confidential. It Is also protected and registrad under Dutch laws through the Dutch government department for Taxes. The drawing and/or models may not be copied, reproduces, duplicated or disclosed to others, in whole MANHOLE STEEL WITH COAMING TYPE B-OVAL

HANDHOLES - MANHOLES ríOPSEEN RUSE» NEOPRtEN RUBBER

HANDHOLES - MANHOLES STAINLESS STEEL

Nominal size: Acier/ Acier

Performance: Staal/Staal

Nominal size:

Nominai size:

Nominal size:

Nominal size: Roestvrij staal/Roestvrij staal Stainless steel/Stainless steel Rostfreier Stahl/Rostfreier Stahl Acier inoxydable/Acier inoxydable

Nominal size: Roestvrij staal/Roestvrij staal Stainless steel/Stainless steel Rostfreier Stahl/Rostfreier Stahl Acier inoxydable/Acier inoxydable

Nominal size:

Nominal size:

Nominal size: Roestvrij staal /Roestvrij staal Stainless steel/Stainless steel Rostfreier Stahl/Rostfreier Stahl Acier inoxydable/Acier inoxydable

Performance: Staal/Staal

Nominal size:

Nominal size: Staal /Staal

Nominal size:

Korbm utter Ecrou en anse de panier Roestvrij staal Rostfreier stahl Acier inoxydable AISI 316 is equal to Werkstoff nr. 1.4408

Ecrou en anse de panier Brass in accordance with DIN 17.673 Blatt 1. Dimensions in accordance with DIN 80.704, Material: Cu Zu 40Pb2.

BUTTERFLY TOGGLE Knevelmoer Roestvrij staal/Messing Knebelmutter Rostfreier stani/Messing Ecrou à ailettes Acier inoxydable/Laiton AISI 316 is equal to Werkstoff nr. 1.4408 Brass in accordance with DIN 17.673 Blatt 1. Dimensions in accordance with DIN 80.704. Material: Cu Zu 40Pb2.

EYE BOLT - FISHERY EYE BOLT Roestvrij staal/Messing Rostfreier stahl/Messing Acier inoxydable/Laiton

FIXATION BRACKET stainless steel