Overview
The document provides technical specifications and features of the VC series horizontal fan coil units, designed for marine use. These units are versatile, allowing for both horizontal and vertical installation in confined spaces, such as under furniture or inside cupboards. They can operate as standalone units or be ducted to distribute air across multiple points in a room.

Specifications
The fan coils are available in 11 models with capacities ranging from 2,000 to 24,000 BTU/h. They feature a finned heat exchange coil, silent centrifugal fans with high-efficiency motors, and a large stainless steel condensate collection tray with drainage holes. The units are equipped with air vent valves and hydraulic connections. Customization options are available for capacity, size, and air sanitation technology.

Technical Data
Operating conditions for cooling include a water inlet temperature of 7°C and outlet temperature of 12°C, with ambient air inlet temperatures of 27°C dry bulb and 19°C wet bulb. The performance is measured with a clean air filter.

Model Specifications
The document lists detailed specifications for each model, including:

• Capacity in BTU/h and Watts
• Power supply requirements (230V, single-phase, 50-60Hz)
• Full load amps and nominal power input
• Maximum circuit breaker ratings
• Air flow rates and fan speeds
• Water connection diameters and flow rates
• Pressure drops in kPa and m.C.A.
• Suggested air supply insulation and plenum spigots
• Condensate drain diameter
• Physical dimensions (length, depth, height) and weight

Additional Features
The fan coils can be equipped with electromechanical or digital controllers and a sterilization system using UVA/UVC technology.