- Catalogs
- Tender Connect S4U GmbH
- Driling-Template-Dinghy-DE-EN-2023
Driling-Template-Dinghy-DE-EN-2023
Driling-Template-Dinghy-DE-EN-2023
Drilling Template: DINGHY - Installation Guide Summary
General Information
This document provides instructions and specifications for using the DINGHY drilling template, produced by s4u GmbH, located in Unterschleissheim, Germany.
Template Specifications and Usage
- Scale: The template is provided at a 1:1 scale.
- Dimensions: Various measurements are indicated, including distances such as 451 mm, 549 mm, 500 mm, 572 mm, and adjustable center-to-center distances ranging from 400 mm to 700 mm (16 to 24 inches).
- Important Note on Material Behavior: The template may deform or widen if exposed to moisture or wet conditions, which will affect the accuracy of the scale and measurements.
- Recommendation: It is advisable to trim the template to the minimum necessary size before installation to ensure precision and ease of use.
Installation Considerations
- Distance Adjustment: For yachts with a steep and straight stern, the center-to-center distance must be increased, potentially up to the middle of the dinghy stern.
- Reference: Users are strongly advised to consult the full installation manual for detailed instructions and to ensure proper fitting.
Contact and Manufacturer Information
Manufacturer: s4u GmbH
Address: Thomas-Mann-Str. 10, 85716 Unterschleissheim, Germany
Email: [email protected]
Showroom: Max-Planck-Str. 3, 85716 Unterschleissheim
Catalog excerpts
Drilling Template: DINGHY Bitte unbedingt beachten, dass die Schablone sich bei Nässe oder Feuchtigkeit verziehen kann und dann nicht mehr maßhaltig ist! Please be aware of the fact that this template might widen when it gets wet so that the scale 1:1 would no longer be correct! Dieser Abstand muss für Yachten mit steilem und geradem Heck vergrößert werden. Maximal bis ca. zur Mitte des Beiboot Spiegels. Bitte Installationsanleitung beachten! This distance has to be increased for yachts with a straight and steeply raising stern. Max up to the middle of the dinghy stern. Please read installation manual carefully! Boden des Beibootes Bottom of the Dinghy Mögliche Abstände von Mitte zu Mitte: 400 bis 700 mm Possible distance middle to middle: 400 to 700 mm (16 to 24 inch) s4u GmbH Thomas-Mann-Str. 10 85716 Unterschleissheim Germany Showroom: s4u GmbH Max-Planck-Str. 3 85716 Unterschleissheim Maßstab: 1:1 Scale 1:1 Stand 02-2023 Es hat sich bewährt die Bohrschablone vor der Installation auf das notwendige Maß zuzuschneiden. You may cut down the template to the minimum necessary size before inst
Open the catalog to page 1All Tender Connect S4U GmbH catalogs and brochures
TenderConnect Installation Guide32 Pages
