video corpo

Saturn INS

Saturn INS

Saturn INS

Product catalog summary
Introduction
The SATURN INS (Inertial Navigation System) by Teledyne TSS is a leading surface navigation system that enhances the SATURN fibre optic gyro compass system with inertial navigation capabilities. It is available in three variants based on heading accuracy: SATURN10INS (0.1° sec lat), SATURN30INS (0.3° sec lat), and SATURN50INS (0.5° sec lat).

Specifications
  • Heading Accuracy: 0.1°, 0.3°, and 0.5° sec lat RMS.
  • Roll & Pitch Accuracy: 0.01° RMS for SATURN10INS and 0.05° RMS for SATURN30/50INS.
  • Heave Accuracy: 5 cm or 5% (delayed for SATURN30/50INS).
  • Alignment Time: 10 minutes.
  • Angular Rate: ≥300°/s for SATURN10INS and ≥500°/s for SATURN30/50INS.
  • Operating Latitude: ±80°.

Performance and Compatibility
The system provides position, heading, pitch, roll, heave, and velocity outputs and is compatible with GPS, EM Log, and DVL. It offers low power consumption and is maintenance-free with a high mean time between failures (MTBF).

Product Features
  • Fast alignment time from switch-on to settle.
  • IMO approved and WheelMark certified.
  • Simple configuration via TSS common embedded browser.
  • Robust aluminium construction with IP31 rating.

Power and Interface
  • Power Supply: 18 - 36Vdc.
  • Power Consumption: 16W for SATURN10INS and 14W for SATURN30/50INS.
  • Interfaces: Configurable RS-232/RS-422, Ethernet, and status/alarm relay contacts.
  • Data Formats: NMEA 0183, IEC 61162, TSS proprietary, and industry standard.

Physical and Environmental Characteristics
  • Dimensions: 179.5mm (h) x 165mm (w) x 366mm (d).
  • Weight: 8.2kg for SATURN10INS and 7.1kg for SATURN30/50INS.
  • Environmental Rating: IP66 for SATURN10INS and IP31 for SATURN30/50INS.
  • Operating Temperature: -20°C to +55°C.
  • Storage Temperature: -30°C to +70°C.

Compliance and Warranty
The SATURN INS meets or exceeds various international standards and comes with a 12-month international warranty including parts and labor.

Scope of Supply and Options
Each unit comes with power/data cables and an RJ45 Ethernet cable. Optional accessories include extended cables, mounting plates, and repeaters.
See more

Catalog excerpts

Saturn INS-1

A Teledyne Marine Product Datasheet INS Surface Navigation Systems When Performance Matters SATURN INS (Inertial Navigation System), from Teledyne TSS, is a world leading surface navigation system which offers enhanced unparalleled INS performance which builds on the TSS SATURN fibre optic gyro compass system by adding inertial navigation (INS) capability. As with SATURN, it is available in three standard heading accuracy variants: 0.1° sec lat. (SATURN10INS), 0.3° sec lat. (SATURN30INS) and 0.5° sec lat. (SATURN50INS). Inertial position data is produced using an INS algorithm, within the firmware framework of SATURN whilst attitude data is delivered via accurate roll and pitch performance of 0.01° (SATURN10INS) and 0.05° (SATURN30/50INS), and a heave performance of 5cm or 5%. The SATURN INS operates at its ultimate performance when connected to an accurate external sensor such as GPS. SATURN offers a fast alignment time of only 10 minutes, from switchon. All SATURN INS units are IMO approved and are WheelMark certified to the Marine Equipment Directive. PRODUCT FEATURES AND BENEFITS • Three model options: 0.1°, 0.3° and 0.5° sec lat heading accuracy • Position, heading, pitch, roll, heave and velocity outputs • Compatible with GPS, EM Log and DVL • Low power consumption compared to RLG alternatives • Maintenance free with high MTBF • Based on the dependable Teledyne TSS FOG IMU A member of Teledyne Marine • Built in DVL calibration functionality • Fast alignment time, from switch-on to settle • IMO approved and WheelMark certified • Simple configuration and set up via TSS common embedded browser • Robust alumini

 Open the catalog to page 1
Saturn INS-2

A Teledyne Marine Product Datasheet $ SATURN INSSurface Navigation SystemsTECHNICAL SPECIFICATIONS TELEDYNE TSSEverywhereyoulook" C€ Specifications subject to change without notice. © 2019 Teledyne Ltd. All rights reserved. Teledyne Marine ABZ Business Park, International Avenue, Dyce, Aberdeen AB21 0BH, UK Tel: +44 (0)1224 772345 Fax: +44 (0)1224 772900 www.teledynemarine.com/tss Email: [email protected]

 Open the catalog to page 2

All Teledyne D.G.O'Brien catalogs and brochures

  1. Omicron

    5  Pages

  2. FACT

    2  Pages

  3. Compact FACT

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.