ELECTRICAL PRODUCTS • Single and multi-pin designs Single and multi-pin high pressure, high temperature electrical penetrators • Glass-to-metal sealing for HPHT environments • Easily designed and configured for custom applications Teledyne DGO’s penetrators are engineered using industry-leading glass-to-metal sealing • Subsea sensors technology, which provides a reliable hermetic • Subsea electronics modules compression seal to the conductors and the penetrator body. They are ideal for instrument housings in extremely difficult environments, such as downhole applications in oil and gas wells. DGO’s penetrators are offered in various water blocking, voltage isolation and mounting arrangements. • Chemical injection valves • Erosion/Corrosion monitoring • Flow meters K E Y F E AT U R E S • 1 to 26 pin or socket connector designs • Pressure resistance to 30,000+ psig • Temperature resistance to 230+°C (+446°F) • Voltage ratings to 500 VDC technologies have performed without fail in thousands of high-stress environments over five decades. DGO products are used in nuclear reactors, hull penetrators on submarines for the US Navy, and many other systems that • Current ratings to 5 amps • Insulation resistance 5 GΩ @ 500 VDC • Helium leakage less than 1 x 10-8 cc/sec • Vibration and shock qualified • NACE MR0175 compliant • Dual sealing/redundant sealing • Metal sealing available require the highest reliability. The glass-sealed products have been tested to over 60,000 psi without fail. CONTACT: Teledyne Oil & Gas [email protected] tel: +1 386 236 0780 162 Corporate Drive Suite 100, Portsmouth, NH 03801 tel +1 603 474 5571 • fax +1 603 474 3161 ©Teledyne Oil & Gas 2014 Teledyne proprietary. For reference only. All rights reserved.