Catalogs >
Teledyne D.G.O'Brien >
ODI Nautilus Rolling Seal Hybrid

ODI Nautilus Rolling Seal Hybrid
1Pages

Catalog excerpts

HYBRID PRODUCTS GAF/ELI provides for gross alignment before connector shell contact and gives positive latching indication. Center actuator material change offers increased margin against deformation, for overall increased connector field reliability. 3 Bulkhead main spring (not shown) force increase assures manifold return even when mated at excessive angles. 4 Longer, contoured lead-in bushing enhances fine alignment of connector halves during the mating sequence. HYBRID WET MATE • Enhanced Design Features • Fully Qualified • 2-Way Electrical, 4-Way Optical • <0.5dB IL / 3.3kvdc 30A • 10 kpsi Ambient Bulkhead bushing now reinforced and more robust for ROV handling. NautilusTM Rolling Seal Hybrid (NRH) Connector 2 NautilusTM Electrical Circuits, 4 Rolling Seal Optical Circuits Hybrid connector available in ROV, Stab and Manual-Mate configurations • 30 year Design Life RELATED PRODUCTS • Rolling Seal Connectors • NRH Connectors • Dry-Mate Optical Connectors • APC Rolling Seal Connector • High Integrity Optical FACT • High-Pressure Feed-Through Optical Penetrator www.teledynemis.com teledynemis@teledyne.com The evolutionary NRH MK III design features five enhancements borne out of feedback from our customers and focuses on enhancing operational efficiencies and reducing risks during ROV intervention where and when circumstances provide for less than optimal mating/demating conditions. All MK III design enhancements are field retro-fittable and backwards compatible with MK II connectors. Subsea control modules and umbilical terminations often have need for both power and high-speed data transmission via optical fiber. Addressing this challenge, the Teledyne ODI NautilusTM Rolling Seal Hybrid (NRH) Connector combines the reliability and electrical current capacity of the industry-standard NautilusTM Connector with the flexibility and multi-channel optical capabilities of the Rolling Seal Connector. Containing two proven technologies, this product is particularly well-suited for applications requiring up to four optical circuits and two higher power electrical circuits rated at 30 amps and 3.3 kVDC in a robust fully wet-mateable connector. On one side of the connector, the patented Rolling Seal design excludes water and silt from the region where the optical ferrules are brought into contact, providing a clear oil-filled conduit for the ferrules to contact and create a low-loss optical path. Featuring the Teledyne ODI “Dual Seal” design philosophy, the NautilusTM side of the connector boasts two independent oil reservoirs, providing two completely separate barriers to the ingress of sea water. The patented design of the electrical contacts allows the pin to enter these reservoirs and to transfer sealing via a shuttle pin and dual wiper seal assembly. ROV, Stab or Manual-Mate configurations and various Oil-Filled Hose options are available

Open the catalog to page 1