PRODUCT DATASHEET TELEDYNE MARINE Electrical Field Assembled Cable Terminations for Subsea Applications – Available in 1-way thru 7-way configurations The Field Assembled Cable Termination (FACT) from Teledyne ODI is a key enabling technology developed to extend the operational depth and significantly increase the reliability of cable terminations. FACT is suited for Production and Infield Umbilical Termination, Drilling Controls, Installation/ Workover Control Systems (IWOCS), Umbilical Splices, Buoy End Terminations, Observatory Node Termination and Remote Instrumentation. Electrical Field Assembled Cable Termination The FACT modularized system completely isolates the cable elements from the pressure- balanced dielectric fluid-filled splice chamber and ambient subsea pressure using a high reliability penetrator assembly. The FACT approach to cable termination eliminates cabledependent design limitations and common mode/single Cutaway of Electrical Field Assembled Cable Termination point failures. The major design elements used are based on fully qualified and field-proven sealing technologies, and draws upon ODI’s extensive experience in cable termination. The FACT penetrator assemblies may be terminated directly to atmospheric enclosures or pressure balanced dielectric fluid-filled splice canisters. The FACT penetrator assemblies have also been designed with modularity in mind and may be used with Teledyne ODI ancillary accessories to adapt to a wide array of interfaces. The standard FACT components allow Teledyne ODI to factory build and test the majority of the termination assembly. As a result, only cable breakout, soldering, and encapsulation are performed in the field, thus significantly reducing operator dependence, termination time and significantly increasing reliability. RELATED PRODUCTS • Wet-Mate Connectors • Subsea Power Connectors • Subsea Junction Boxes • Pressure Balanced Oil Filled (PBOF) Hose • Modular Connectorized Distribution Unit (MCDU)

PRODUCT DATASHEET TELEDYNE MARINE Electrical Field Assembled Cable Terminations for Subsea Applications – Available in 1-way thru 7-way configurations TECHNICAL SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Operational Temperature Storage Temperature Maximum Test Pressure Maximum Operational Pressure Minimum Cable Diameter Maximum Cable Diameter Material Design Life Number of Circuits Maximum Operational Current Maximum Operational AC Voltage Maximum Operational DC Voltage Insulation Resistance 14˚F to 122˚F (-10˚C to +50˚C) * -40˚F to 140˚F (-40˚C to +60˚C) * 10,000 psi * 6,600...