Catalogs >
Teledyne D.G.O'Brien >
110 SERIES COAXIAL CONNECTORS

110 SERIES COAXIAL CONNECTORS
4Pages

Catalog excerpts

FEATURES • 50 Ohm Coax • Glass-to-metal seal pressure barrier in the receptacle for maximum protection of equipment • Dual O-ring seals - primary face seal with secondary piston seal • Simple, durable construction; excellent for cameras or instruments used in or around water or other harsh environments 110 SERIES I RECEPTACLE OPTIONSPAGE 23 RECEPTACLE MATERIALS (STANDARD) Body: Coupling Rings: Insulators, Plugs: Insulators, Receptacles: O-rings: Note: 316/316L Stainless Steel 316 Nylon Glass Buna-N Alternate material options are available, e.g., Titanium, Monel and Inconel; consult factory for details PLUG ASSEMBLY PERFORMANCE Impedance: Frequency Range: Insulation Resistance: Max Operating Voltage: Max Operating Current: Temp Range, Operating: Temp Range, Storage: Max Operational Pressure: SPLICE 50 Ohms 0-1.5 GHz 5 Gohms at 500 VDC 1000 VRMS 3 amps -40°F to 165°F -65°Fto175°F 2,000 psi for molded cable assemblies (~4500 ft/1372 m) 10,000 psi open face receptacle INLINE RECOMMENDED CABLES For General Use: For Deep Submergence /Critical Applications: Mil-2-17/28 RG-58 (including shallow water, non-critical applications) TRC CN-4 (50 Ohm) Note: Alternate cables can be accommodated; consult factory for details

Open the catalog to page 1

F THREAD 110 Series Connectors PLUG KITS I STRAIGHT PLUGS RECEPTACLE KITS I STANDARD COAX CONTACT "X" O-RING & BACKUP RING (SAME ALL STYLES) COAX CONTACT COAX CONTACT O-RING E THREAD SPLICE E THREAD BOTH ENDS BOTH ENDS E THREAD 1100004-101_asm 1100004-101_asm Inline Splice Coax Contact Cable Accommodated O-ring 5/8-18UNF “X” Back-up Ring .965 COAX CONTACT .436 Diameter 3/4 HEX DIM. 5/8-18UNF FLATS 3/4 HEX DIM. ACROSS ACROSS FLATS n/a Cable Accommodated

Open the catalog to page 2

COAX CONTACT COAX PLUG CABLE ASSEMBLIES I STANDARD STRAIGHT I SINGLE-ENDED 5/8-18UNF PRESSURE PROOF CAPS I STANDARD 1100004-101_asm E THREAD BOTH ENDS 3/4 HEX DIM. 1100004-101_asm ACROSS FLATS AVAILABLE IN 5 FEET INCREMENTS Cable Assembly Part No. Pressure Proof Cap Part No. 1 Cable Type Cable Length AVAILABLE IN 5 FEET INCREMENTS n/a 316 Stainless Steel MS28775-013 (Buna-N) (Dimensions in inches) AVAILABLE IN 5 FEET INCREMENTS Cable Diameter Polyurethane (Black) (Dimensions in inches unless otherwise noted) AVAILABLE IN 5 FEET INCREMENTS

Open the catalog to page 3

CRIMP TOOL CROSS REFERENCE IMPORTANT ORDERING NOTES 1. DGO can terminate plug kits and receptacle kits to cable(s) of your choice at very competitive prices. Please send us your requirements in order to provide an accurate price and lead time. 2. Different cable lengths are available. Consult factory for specific assembly part numbers, price, and delivery. 3. Standard cable assembly test pressure is 2,000 psi (138 bar). If higher test pressures are required, please advise factory immediately with your specifications. 4. Termination instructions are available on our website. 5. Alternate...

Open the catalog to page 4