PRODUCT DATASHEET TELEDYNE MARINE 110 Series Coaxial Connector Glass to Metal Sealed coaxial connectors for harsh environments – Simple and durable construction Designed to interconnect 50 ohm coaxial cables in subsea pressure applications for camera systems and instruments used in or around water. Mated receptacles, plugs, and cable assemblies available: – Straight plugs – Right angle plugs – Bulkhead receptacles – Inline receptacles – Splice receptacles Plugs are machined in 316 stainless steel body with a nylon insulator – Supplied pre-terminated to the end of a 50 ohm coaxial cable Receptacles are machined in 316L stainless steel bodies with a coax element glass sealed directly into the body Receptacle body is designed to fit a standard SAE port with a threaded hole and configuration to allow an O-ring around that receptacle base Center conductor pin is surrounded by a shield and all components are sealed together in a glass sealing process Receptacle contains integral glass to metal seals for maximum protection of your equipment in differential pressure applications rated up to 2000 psig Connectors can be used as a two-way configuration as both components serve as conductive paths Plugs are supplied pre-terminated using application specific crimp tools, molds and a controlled molding process to make an effective termination Consistent performance of this connector series over 45 years with tens of tho

PRODUCT DATASHEET TELEDYNE MARINE 110 Series Coaxial Connector Glass to Metal Sealed coaxial connectors for harsh environments TECHNICAL SPECIFICATIONS* GENERAL SPECIFICATIONS Operational Temperature Storage Temperature Max Operational Pressure Material -40°F to 165°F (-40°C to 74°C) -65°F to 175°F (-54°C to 80°C) 2,000 psi for molded cable assemblies (~4,500 ft./1,372 m) 10,000 psi (open face receptacle) 316/316L Stainless Steel ELECTRICAL SPECIFICATIONS Operational Current 3 Amps Max Operating Voltage 1,000 VRMS Insulation Resistance 5 Ghoms at 500VDC Frequency Range 0 - 1.5 Ghz Impedance 50...