Catalogs >
Teledyne D.G.O'Brien >
107 Series MIL-C-24217

107 Series MIL-C-24217
8Pages

Catalog excerpts

RECEPTACLE FEATURES • Mil-C-24217 design • Instrumentation & Power: Coax, #16, #12, #8, #4, #0 AWG • 3-48 contacts • Glass-to-metal seal pressure barrier in receptacle for maximum protection of equipment (10,000 psi open face pressure capability) • Dual O-ring seals • Dual keys (120 degree standard, other MS options available) • Simple rugged construction; excellent for instruments or equipment used in water or other harsh environments 107 SERIES I RECEPTACLE OPTIONSPAGES 10-16 WELD FLANGE WELD MATERIALS (STANDARD) Body: Coupling Rings: Insulators, Plugs: Insulators, Receptacles: O-rings: Note: 316/316L Stainless Steel Al-Ni-Br Diallyl or Delrin Glass Buna-N Alternate material options are available, e.g., Titanium, Monel and Inconel; consult factory for details PERFORMANCE Pressure: Insulation Resistance: DWV: Rated Voltage: Contact Ratings: Temp Range, Operating: Temp Range, Storage: Physical Shock: Vibration: 14 pin and above operate to 6,500 psi mated; receptacles up to 10,000 psi open face 5 Gohms at 500 VDC 1900 VRMS @ 60 Hz 625 VRMS Size (AWG) Test Operation LOCKNUT FLANGE INLINE ‘Depends on number of contacts

Open the catalog to page 1

FRONT FACE OF RECEPTACLES FRONT FACE OF RECEPTACLES

Open the catalog to page 2

PLUG KITS I STRAIGHT PLUGS No. of Contacts Wire Accom. Wire Accom.

Open the catalog to page 3

RECEPTACLES I WELD No. of Contacts

Open the catalog to page 4

RECEPTACLES I END FLANGE BOLTED RECEPTACLES I MID FLANGE BOLTED .221 0 6 PLACES EQUALLY SPACED NOTE: BOLT HOLE IN LINE WITH 12 O’CLOCK POLARIZING KEY .211 0 6 PLACES EQUALLY SPACED NOTE: BOLT HOLE IN LINE WITH 12 O’CLOCK POLARIZING KEY ConteCs 120 ° Key part DGO pa" No. nOm B NOM Thread NOM

Open the catalog to page 5

RECEPTACLES I LOCKNUT FLANGE RECEPTACLES I BULKHEAD SPACER (ORDER SEPERATELY)- F THREAD ^E THREAD O-RING E THREAD Contacts 120° Ke» Pa[t No- DGO Part No- nOm

Open the catalog to page 6

PRESSURE PROOF CAPS I STANDARD I FOR RECEPTACLES For Connector Mil Spec Part No. DGO Part No. Outside Diameter

Open the catalog to page 7

PRESSURE PROOF CAPS I STANDARD I FOR PLUGS O-RING Mil Spec Part No. DGO Part No. Outside Diameter IMPORTANT ORDERING NOTES 1. DGO can terminate plug kits and receptacle kits to cable(s) of your choice at competitive prices. Please send us your requirements in order to provide an accurate price and lead time. 2. 120° keying is standard. Alternate keys are available in accordance with Mil-C-2G217 (i.e., 90°, 135°, 150° and 165°). 3. DGO produces all Mil-C-24217 configurations; only the commonly used configurations are shown in this catalog. Please consult us if you do not see the...

Open the catalog to page 8