Catalogs >
Teledyne D.G.O'Brien >
100 Series Mil-C-24231

100 Series Mil-C-24231
5Pages

Catalog excerpts

A Teledyne DGO 100 Series Datasheet 100 Series Connector Glass to Metal Sealed Connectors Reliable to Full Ocean Depth • Multiple shell insert configurations --- Straight, mated plugs and receptacles 3 to 40 contacts Right angle, mated plugs and receptacles Advanced coatings are available for application to the metal plug shell to delay the cathodic bond delamination: -- DGO-1 is a proprietary factory applied advanced performance primer Glass Reinforced Epoxy (GRE) overcoat is available for applications where cathodic delamination is considered high risk Thru hull fittings available in turret and single type Polyurethane molded insulator with NiCu shells Receptacle inserts are molded with high impact epoxy (chockfast) and a nickel copper body Receptacles come supplied with 15 foot pigtails for direct installation Available as molded cable assemblies or in kit form 100 Series Connector ADVANTAGES • Designed, manufactured and tested according to Mil-C-24231 requirements • Rated for 2,000 psig in standard configuration with Chockfast orange inserts for submarine approved equipment • Used in Navy dry mate submersible interconnect applications • Standard with NCC (non-cathodic) bond enhancement coating that complies with NCC standards governed by the Navy Molding Manual • Teledyne DGO is a Navy ProMold Certified supplier and offers a variety of polyurethane molding shapes and configurations.

Open the catalog to page 1

Shell Material Nickel/Copper (NiCu) Operational Current 7.5 Amps Max Operating Voltage 1,600 VRMS Insulation Resistance 2,000 megohms or greater when measured between any pair of contacts and between contacts and shell using 500 volts DC test. Shield to ground 100 megohms. Frequency Range 60 Hertz Teledyne DGO 162 Corporate Drive, Portsmouth, NH 03801 USA Tel +1 603 474 5571 Email: dgo@teledyne.com Specifications subject to change without notice. 12/2015. ©2015 TELEDYNE DGO, a business unit of Teledyne Instruments, Inc. Other products and company names mentioned herein may be...

Open the catalog to page 2

Teledyne DGO 162 Corporate Drive, Portsmouth, NH 03801 USA Tel +1 603 474 5571 Email: dgo@teledyne.com Specifications subject to change without notice. 12/2015. ©2015 TELEDYNE DGO, a business unit of Teledyne Instruments, Inc. Other products and company names mentioned herein may be trademarks and/or registered trademarks. D/N 549307

Open the catalog to page 3

Open the catalog to page 4

DIMENSIONS AND PART NUMBERS Teledyne DGO 162 Corporate Drive, Portsmouth, NH 03801 USA Tel +1 603 474 5571 Email: dgo@teledyne.com Specifications subject to change without notice. 12/2015. ©2015 TELEDYNE DGO, a business unit of Teledyne Instruments, Inc. Other products and company names mentioned herein may be trademarks and/or registered trademarks. D/N 549307

Open the catalog to page 5