A Teledyne Marine Product Datasheet The Teledyne Bowtech ST6K, Xenon submersible strobes are self-contained, compact, high intensity xenon beacons, designed for use as a visual aid to locate submersible vehicles or instrumentation packages when they surface for recovery. They can also be used to mark underwater objects, vehicles, divers or work sites. The high intensity Xenon gas discharge lamp has a maximum power rating of 0.3 watt seconds and can be seen from up to 4 miles away, depending upon atmospheric and wave conditions, observer’s height, and frequency setting of the strobe. Underwater viewing distances vary, depending upon the water clarity. The ST6K is available in several different configurations, with a choice of on/off switches, housing sizes and remote flash heads. The strobes are battery powered as standard with the option of 12-24Vdc input in the short housing. There are also different lamp colour options available. PRODUCT FEATURES Daylight switch Long and short housing • 6000m depth rated • High intensity • Pressure switch Everywhereyoulook™A member of Teledyne Marine

A Teledyne Marine Product Datasheet ST6KUnderwater Emergency Xenon StrobeTECHNICAL SPECIFICATIONS Electrical Flash Rate, adjustable Max Flash Energy Tube Life Photocell Battery Type Battery Life Connector (24Vdc option) SWITCHES Photocell - A Photocell is included in each strobe, to turn the unit off and conserve battery life during daylight hours. The photocell is factory set to activate at approximately 100 Lux, however this level can be adjusted by the user according to operational requirement. Additionally, the photocell switch can be disabled to allow continuous operation. Pressure -...