Marine Fenders

About TekMarine From its base in the United States, TekMarine Systems LLC designs and supplies advanced marine fendering and mooring systems to ports, harbors and waterways across the world. We bring a wealth of engineering and market experience to each project. Our fender solutions range from simple modules to the most sophisticated engineered systems. We supply every type of berth, including passenger terminals, bulk and RoRo ports, Oil and Gas installations and naval facilities. We offer full support at each step from early concept discussions through to design and detailing, material selection,...

TekMarine TJZD-A Wheel Fenders guide vessels safely into berths and narrow channels, such as dry-docks or lock entrances, or around corners. On contact, the wheel slides back against concealed rollers for higher energy absorption than a traditional Roller Fender and a very low rolling resistance. Fenders can be grouped vertically to deal with high water-level variations, or side-by-side to guide vessels along a channel. For large hull angles, fenders can be mounted at an angle. Every Wheel Fender installation is custom designed. Please ask TekMarine about the best choice of tire size, casing...

Q TJZD-B Roller Fenders TekMarine TJZD-B Roller Fenders are often used to protect lock and dry-dock entrances and narrow channels, and for effective corner protection. The bearings are made from stainless steel and a low-friction composite, and sit safely inside a rugged steel casing. The design allows for minimal rolling resistance and years of safe operation with little maintenance. Fenders can be grouped vertically to deal with high tidal variations, or side-by-side to guide vessels along a channel. For large hull angles, fenders can be mounted at an angle. All Roller Fenders are custom designed....

Profile Fenders are used for smaller vessels and lighter applications. They are usually bolted to the structure, either through the top or sides of the fender. Available in various sections including D and square, they can be supplied in almost any length then cut and drilled as needed. Version 001d / Copyright TekMarine Systems LLC, 2015

TEKMARINE SYSTEMS LLC 9595 Six Pines Drive, Suite 8210 The Woodlands Houston, TX 77380, USA phone +1 832 631-6104 email [email protected] web www.tekmarine.com Catalogue version 001d