Series C Fuel Tanks Manufactured from High Density Polyethylene (Eltex) in Italy. These tanks are red in colour and come complete with inspection cover, filler cap with vent and an 8mm fitting to suit flexible tubing. A pickup pipe for fuel feed is already attached. A fuel return to suit copper or flexible pipe may also be fitted. There is provision to fit a sender unit (S3-20 to S340) suitable for use with gauge IPFR. For filling tanks remotely from a deck filler the inlet connecter kit will be required. Part No. L W H Litres TT-5634 TT-5635 TT-5636 TT-5637 TT-5638 TT-5639 TT-5641 TT-5642 TT-5643 TT-5644 TT-5645 TT-5646 TT-5647 TT-5648 TT-5649 TT-5650 TT-5651 TT-5652 500 650 800 500 650 800 650 800 660 910 660 910 800 950 1100 800 950 1100 350 350 350 350 350 350 400 400 300 300 410 410 400 400 400 400 400 400 300 300 300 230 230 230 280 280 410 410 300 300 280 280 280 400 400 400 42 55 70 33 43 53 50 65 62 90 70 90 70 84 96 102 120 140 TT-5634 to TT-5642 TT-5512 IPFR Add 30mm to height to allow for fittings Add 90mm to height for TT-5521 Elbow TT-5643 to TT-5645 IPFR S3-20 S3-28 S3-40 FL-2 TT-5521 TT-5512 Fuel Gauge Fuel Sender 200mm Fuel Sender 280mm Fuel Sender 400mm Sender Fitting flange 38mm Inlet Connector Kit Mechanical Sender/Gauge TT-5521 TEK TANKS The Old Stables,West End Farm, Upper Froyle, Alton, Hampshire GU34 4JR. England Tel: +44 (0)1420 520830 fax: +44 (0)1420 520840 www.tek-tanks.com S3-20 200mm S3-28 280mm S3-40 400mm email: [email protected]

Series C Fuel Tanks Manufactured from High Density Polyethylene (Eltex) in Italy. These tanks are red in colour and come complete with inspection cover, filler cap with vent and an 8mm fitting to suit flexible tubing. A pickup pipe for fuel feed is already attached. A fuel return to suit copper or flexible pipe may also be fitted. There is provision to fit a sender unit (S3-20 to S340) suitable for use with gauge IPFR. For filling tanks remotely from a deck filler the inlet connecter kit will be required. Part No. L W H Litres TT-5653 TT-5654 TT-5655 TT-5656 TT-5657 TT-5658 TT-5659 TT-5660 TT-5661...

Series C Waste Tanks An excellent range of sensibly priced waste holding tanks. Moulded in Italy with a thicker wall than the equivalent green water tanks in the Series C range to combat odour problems normally associated with moulded tanks. Fitting sizes are 1 1/2" Inlet, 1 1/2" Pumpout and 1" Vent all mounted on an inspection plate which is removable. Fittings can be supplied with either elbows or straights. Part No. L W H TT-4307 Litres 450 390 290 43 TT-4300 450 390 200 28 TT-4308 550 390 290 53 TT-4301 550 390 200 35 TT-4309 650 390 290 63 TT-4302 650 390 200 41 TT-4310 750 390 290 73 TT-4303...

Series C Water Tanks Green rigid plastic tanks moulded in Italy. These tanks come with a threaded inspection porthole, with strengthening ribs above and below tank. The fittings are designed for self assembly, we can however fit them for a small charge. The strap kit ST2340 is ideal for holding these tanks in position. TANKS Part No. L W H Litres TT-5011 450 390 290 47 TT-5012 450 390 200 32 TT-5013 550 390 290 57 TT-5014 550 390 200 39 TT-5015 650 390 290 67 TT-5016 650 390 200 45 TT-5017 750 390 290 77 TT-5018 750 390 200 52 TT-5019 850 390 290 87 TT-5020 850 390 200 60 TT-5021 950 390 290...

Series A Rectangular Tanks A range of rotationally moulded tanks suitable for water and waste. These tanks are now being used by most of the leading British manufacturers. Originally designed as marine tanks, they have been moulded in virgin grade Linear Medium Density Polyethylene resin, which is natural in colour. The resin has a long term UV package and is suitable for use in or out of direct sunlight. These tanks have been moulded to our specification, with a wall thickness of 9mm for tanks over 35 gallons. This extra thickness will combat any odour problems sometimes associated with cheaper...

Series A Shaped Tanks Identical to the Series A Rectangular tanks in material and wall thickness, these tanks are suitable for water, waste or diesel fuel. They will meet CE certification standards once fitted with the Tek-Tanks fittings. We have given you the basic information below but more comprehensive drawings are available on request. The drawings for these tanks can also be downloaded from our website. Please let us know what fittings you require and where and we will price up each tank individually. Tank only prices can be found on our website. Part No. L W H Litres 0001 0004 0025 0026...

Level Indicators 1 FUEL TANK SENDERS All stainless steel construction, suitable for petrol, diesel and water. FLB-1 Fitting Flange available for 1 1/4" BSP thread. European output: 10ohms Empty, 180 ohms full US output: 35 ohms full, 230 ohms empty. Please specify European or US output when ordering. S3 Fuel Sender S3 20-40 20-25-30-35 or 40cm S3 45-50 45 -50cm S3 55-60 55-60cm S3 65-70 65-70cm S3 75-80 75-80cm S3 85-100 85-90-95-100cm S3 110 110cm S3 120 120cm S3 140 140cm Longer lengths available to order WATER TANK SENDERS Black ABS senders for water tanks. European output: 10ohms Empty, 180...

Level Indicators 2 WASTE TANK SENDERS & GAUGES SHS SERIES New type stainless steel senders (240-30 ohm). Sender set includes fitting flange and analogue gauge. Suitable for 12 or 24 volt. SHS-2 SHS-3 SHS-4 SHS-5 SHS-6 SHS-3 21cm 31cm 41cm 51cm 76cm WHT-22 WHT SERIES New type ABS waste tank sender and LED gauge. Uses 1 1/4” BSP FL-3 flange. Suitable for 12 or 24 volt. WHT-22 WHT-32 WHT-42 ISS PK-6 FL-3 22cm ABS sender for LED gauge 32cm ABS sender for LED gauge 42 cm ABS sender for LED gauge 3 level LED gauge 6m Connection cable for WHT & ISS Fitting Flange TANKMINDER Tek-Tanks Tankminder. A compact...

Level Indicators 3 Profile Legacy 8 Tank Display Monitors up to 8 different tanks. Multi -Tank display shows fluid levels for up to 8 tanks as 12 position vertical bar graphs (see upper graphic to right). Detailed tank display with 24 position bar graph and tank status message (see lower graphic to right). Autonomous tank monitoring. Tank high/low audible and visual alerts. If enabled, LPG level is displayed on Multi -Tank View. Legacy 8 Tank Display Runs version 2.0 of the EZ-Profile algorithm which corrects displayed output for tank shape and sensor type. Compatible with the following Senders:...