MICRO-TEC BATTERY CHARGER
1Pages

FICHE MICRO-TEC GB-02:Mise en page 1 14/10/11 13:59 Page 1 BATTERY CHARGER MICRO-TEC 12 V / 06 A - 12 V / 10 A - 24 V / 05 A 1 or 2 outputs Experts since 1985 in the conversion of electric energy, for powers ranging from 50 to 3000 watts, TECSUP offers small, lightweight, silent and ready-to-use switch mode battery chargers. Conceived for a consistent charge rate, the MICRO-TEC is perfectly suitable for all the “custom embedded” applications (boats, motor homes, ambulances…) and sectors for which charging safely and correctly is essential (security, street signs, lighting…). Charge quality • Three-states charging curves: - BOOST / Fast charge: restores 80% of battery capacity in the shortest possible time. - ABSORPTION / Top up charge: brings the battery up to 100% capacity without causing excessive gassing or boiling. - FLOATING / Maintenance charge: maintains the battery at its optimum operating voltage without causing gassing. The charger will make up for internal loss and drain, present in every battery. FACTORY PRESET TIME PERIOD FOR SAFETY CURRENT CAPACITY Ah. • IUU charging curves for 2 different types of batteries: lead open, sealed (AGM, Gel). Power Output (voltage / current) Output(s) Universal input voltage Frequency Working temperature (cut off point) Storage temperature Dimensions (mm) Weight Easy to use • Easy to install with connecting cables pre wired. • Horizontal or vertical installation. • The MICRO-TEC allows the battery to be connected and used constantly, while still offering a real BOOST (high voltage) charge over short period. The charger switches back to top-up mode automatically. • Frontal display (Led): - Red: Boost / Absorption - Green: Floating RED LED ON 72 W 20 W 180 W 12 V / 06 A 12 V / 10 A 24 V / 05 A 1 or 2 independent output(s) (depending on the version ) 230 VAC 50 / 60 Hz -20°C to +45°C -20°C to +70°C 148 x 110 x 48 800g Safety • Extruded and anodized aluminium housing. • Smart protection against water: air inlet located at the bottom, outlet at the back of the charger. • Ingress Protection IP 54. • Electronic protection against: power surges at input & short circuits at charger output, battery discharge in the events of mains failure. • Protected against accidental polarity inversion, by an external automotive type fuse. - 2 year warranty. - Listening to and proximity with clients. ENGINEERING Solutions created & developed to measure GREEN LED ON CATALOGUE Standard solutions, customizable & modular • CE conformity. • Electromagnetic compatibiliy (E.M.C.) EN 50081-1, EN 50082-1, EN 55022 class A. • User safety: NF EN 60335-1 and EN 60335- 2-29. Connexions • AC connexion via IEC socket or pre wired 3 pin AC plug (1.80m). • DC connexion via flyleads (1.80m) terminated with ∅ 8 mm dia. crimp terminal. - Knowledge of conditions of use. - Specific versions on request. APPLICATIONS Solutions dedicated to your sector of activity MODELS Predeveloped Solutions 7, avenue du Pré de Challes - PAE des Glaisins - 74940 Annecy-Le-Vieux - FRANCE Tel. : +33 (0)4 50 68 96 22 - Fax : +33 (0)4 50 68 96 34 - info@tecsup.fr - www.tecsup.fr TECSUP n° 80300040 C – Non contractual photo. Specifications • Curve selection with an external jumper.