MasterCAN Display 35 CAN j1939
MasterCAN Display 35 CAN j1939
The document outlines various technologies related to monitoring and displaying machinery parameters. Key technologies include RPM, coolant and oil temperature monitoring, fuel volume and temperature tracking, and engine operation modes. It also covers axle load and air suspension pressure monitoring, as well as active engine failures and diagnostic trouble codes (DTCs) from electronic control units (ECUs).
The system can display over 10,000 parameters from CAN, ISOBUS, S6, and analog sensors. It supports up to 16 fuel level sensors and 16 fuel flow meters, and can connect to a telematics unit with a CAN-interface. The MasterCAN Display can connect to 42 analog sensors via the MasterCAN DAC I/O module, ISOBUS of agricultural machinery, and standard automotive CAN buses.
The system offers automatic scanning and parsing of CAN J1939 and ISOBUS messages, with the ability to handle proprietary CAN J1939/71 messages. It converts analog signals to CAN messages and displays up to 402 machinery operation parameters. The display settings are flexible, allowing for visual monitoring of machinery operation parameters.
For further inquiries, contact via phone at +420 910 122 429, WhatsApp at +420 704 067 474, or email at [email protected]. More information is available at www.jv-technoton.com.
Catalog excerpts
Display 35 Visual monitoring of machinery operation parameters • Automatic scanning and parsing of CAN J1939 and ISOBUS messages • Possibility to parse and display proprietary CAN J1939/71 messages • Conversion of analog signals to CAN-messages • Displays up to 402 machinery operation parameters • Flexible settings of parameters display RPM, coolant and oil temperature, oil temperature. Volume and temperature of fuel in tanks, fuel consumption by each engine. Engine operation mode, engine operation time in each mode. Axle load, pressure in air suspension system. Active engine failures and DTCs of ECUs. Data sources, which can be simultaneously connected to MasterCAN Display: • standard automotive CAN bus (road vehicles, construction equipment) • ISOBUS of agricultural machinery and equipment •up to 16 fuel level sensors and up to 16 fuel flow meters • 2 analog sensors, e.g. axle load sensors •telematics unit with CAN-interface • up to 42 analog sensors via MasterCAN DAC I/O module ADVANCED MACHINERY TELEMATICS
Open the catalog to page 1All TECHNOTON catalogs and brochures
DUT-E fuel level sensor1 Page
DFM Fuel flow meter1 Page
S7 Telematics Technology1 Page
S7 NMEA Data converter1 Page
- Boat sensor
- Ship sensor
- Boat display
- Digital display
- Multi-function display
- Monitoring system
- Wireless sensor
- Ship monitoring system
- Ship flow meter
- Ship monitoring and control system
- Storage tank sensor
- Boat flow meter
- Network gateway
- Digital flow meter
- Boat network gateway
- Fuel sensor
- Remotely controlled monitoring system
- Fuel tank sensor