Fuel level sensor with GSM and GPS A 2-in-1 device – fuel level sensor and GPS tracker in one body џ Quick installation of one device џ Configuration via the Internet џ “Onboard” data analysis џ CANbus connection џ Flexible report configuration Telematic service DUT-E GSM in à fuel tank Monitoring of fuelings and drains of the fuel tank Movement track and positioning control Event detection and notifications Movement tracking: GPS/GLONASS coordinates, speed, parking places, movement duration. Engine start/stop, beginning of movement, entry to zone, speeding, excess time in movement. Fuel tank monitoring: fuel residue, volumes of refiling and draining, fuel decrease (consumption ) from tank. Fuel tanks refiling and draining from tanks + place of the Event. Engine operation monitoring: onboard network voltage, RPM and other 100+ parameters from CAN* bus. Ignition on/off, onboard network voltage excess. Notifications on Events via SMS/e-mail before sending data to server. Connection up to 7 level sensors, and 8 fuel flow meters. Flexible report configuration – 20 templates, reporting is triggered upon Event occurrence (“Each minute”, “Fuel draining”, “Fill-up” etc.) Data validation using accelerometer (movement sign, tank inclination) for higher accuracy of detected Events. Sending onboard Reports to server and directly to user via e-mail. Specification Power supply Operating temperature Buffer memory capacity no less than 50 000 reports Input interface * contactless connection using Crocodile reader is recommended