BIOCON I
5Pages

Biocon I system Biocon I synoptic data System capacity: 7.840 liters/Day Organic load capacity: 4,05 kg BOD5/Day Overall dimensions: 1320x840x1300 mm Dry weight: 280kg Operation weight: 360kg Voltage: 3x220, 380, 440V, 50Hz or 60Hz other to be requested Power input: 3,5KW + 0,75KW transfer pump +0,75KW sludge pump Max Power absorbed in auto cycle: 9A at 380V All piping and tanks made from SS316, bronze type valves Electrostatic powder coated Hydraulic connections 11/2” sewage supply from transfer pump or directly to toilets network 11/2” sea water supply 1” from sludge outlet to sludge tank 11/4” from sludge tank to Biocon inlet 11/2” outlet to overboard 1 1/2” vent Electrical connections Power supply From Biocon panel To transfer pump if there is To sludge pump To holding tank level sensor if there is To sludge tank level sensor Operation: auto, display of all critical parameters at Biocon visual screen Manual mode for any operation pumps or filters cleaning All peripherals, like transfer, sludge pump, level sensors for holding And sludge tank are controlled from Bioco

CONFIGURATION LAYOUT When holding tank level sensor is activated, auto cycle begins, A certain quantity of sewage enters in Biocon unit Microfilter unit expels sludge to the sludge tank during the process When in Sludge tank level exceeds high level, then sludge pump recirculates The upper part of the watered sludge to Biocon unit again Sludge tank may be ship’supply or may come integrated with Biocon unit.

SEWAGE INLET 3" INSPECTION DOOR LEVEL SENSOR CHLORIDE INJECTION POINT VENT 48 mm (RUBBER CONNECTION) AIR INLET MACERATOR ELECTRICAL PANEL FILTER FILTER MOTOR OUTLET MANOMETER INLET MANOMETER PRESSOSTAT SLUOGE VALVE 1" M THREAD PRESSURE VALVE DISCHARGE OVERBOARD (F11 4") THREE WAY VALVE CHLORIDE TANK 10L RECYCLING PUMP SEA WATER PUMP DISCHARGE PUMP

Date Ed. Appr Original EFFLUENT OUTLET TECHNI SA METHONIS 9,18545 PIRAEUS,GREECE SEA WATER VALVE AT SEA PUMP SUCTION SIDE TRANSFER PUMP TO BIOCON Project template with IEC identifier structure SEWAGE TREATMENT SYSTEM BIOCON I SLUDGE TANK SHIP'S SUPPLY BACKWASH TO SLUDGE TANK CLEAN EFFLUENT LEVEL SENSOR FILTER OUTLET FILTER BYPASS ITEM IN DASH LINE IS PREFABRICATED AUTO CLEAN FILTER HYDRAULIC INSTALLATION INSTALLATION WITH SEPARATE SLUDGE TANK AND SEWAGE SUPPLY FROM HOLDING TANK INTERNATIONAL CONNECTION SEWAGE SUPPLY TO BIOCON I sewage supply LEVEL SENSOR SHIP'S HOLDING TANK (HT) STOP AUTO...