SIMPLY BETTER

Norwegian traditions – a business with deep roots TeamTec is continuing a tradition of marine industrial activity at Tangen in Tvedestrand, Norway, dating back to around 1700. Today our company is one of the world leaders in marine waste incinerating systems and stripping ejectors to the shipbuilding industry. TeamTec was founded on May 17, 1984 by a small group of enthusiastic pioneers. Their enthusiasm and passion is carried forward by the entire TeamTec staff, and we are confident that our products will continue to be in the forefront of international marine technology in the future. We are...

TEAMTEC STRIPPING EJECTORS The TeamTec Stripping Ejectors are simple jet pumps driven by fluid. High quality materials and skillful construction make sure you meet onboard requirements. The TeamTec ejectors are made in Ni-Al-Bz EN 1982, Gunmetal / Rg 9 NS 16520 / AISI 316L and Super Duplex. The ejector nozzles are made of AISI 316L, as well as other materials upon request. These material combinations are superior against cavitation, corrosion and wear and tear, and are thus covered by a five (5) year guarantee. When using liquids without abrasives, we can offer a twenty (20) year guarantee. Advantages...

TEAMTEC DIMENSION TABLE Type DN A B C L Weight Max. clearance (mm) (mm) (mm) (mm) (kg) (mm) 1½-2-2½ • Modification of ejector characteristics possible due to in-house engineering and production • Customized capacity/consumption performance curve will be delivered – saving you time! • Any flange standard can be delivered at no extra cost C-TYPE EJECTORS WITH WIDE BODY • All ejectors are hydrostatic pressure tested Type DN A B C L Weight Max. clearance (mm) (mm) (mm) (mm) (kg) (mm) • All types of class certification upon request CRITERIA FOR SELECTION OF PROPER SIZED EJECTORS: • • • • • • • Installation...

PORTABLE EJECTORS • Useful on all type of ships for complete draining of remaining liquid • With built-in non-return suction valve • Equipped with standard nozzle TYPE Suction capacity 1-1-1½ 3 m³/h 1¼-1¼-2 6 m³/h 1½-1½-2½ 9 m³/h Required driving pressure against various discharge heads 5 m 10 m 15 m 20 m 25 m 5.0 bar 6.5 bar 8.0 bar 9.5 bar 11.0 bar 5.0 bar 6.5 bar 8.0 bar 9.5 bar 11.0 bar 5.0 bar 6.5 bar 8.0 bar 9.5 bar 11.0 bar A-EJECTORS: SEMI-PORTABLE • • • • A-series ejectors were developed for periodic use onboard dry cargo vessels. Driving water is normally provided from the fire pump...

ADDITIONAL EJECTORS E ¾-1-1 • Air driven, for evacuating air or gases in suction line to centrifugal pumps etc. • Small and efficient, can be delivered in several material combinations MUDMIXER • For mixing dry powder and liquid for offshore purpose • Several models from 6” and up to 8” powder inlet Usable as vacuum cleaner for sucking up dirt in engine room etc. “Standard” equipment for supply ships, for sucking up the remains in bulk tanks after loading Special air-driven model L4-5-5 also available for same purpose MULTI VAC Water driven jet vacuum pump, designed for extraction of air/gas...

We can’t promise you a great sound, s without but the TeamTec stripping ejectors meet your pumping needs! www.teamtec.no | TeamTec AS | Nyvei 41 | P.O. Box 203 | N-4902 Tvedestrand | Norway | Switchboard: +47 37 19 98 00 | Mail: [email protected]