NODOPOX wind

Product catalog summary

Overview: The NODOPOX wind system is a specialized adhesive processing system designed for the wind industry, capable of handling pasty epoxy resins. It offers a tailored solution for efficient production and processing of synthetic resin-based adhesives, with an output capacity of up to 20 liters per minute, depending on viscosity and mixing ratio.

System Configuration: The system is a mobile, modular 2K system that allows for refilling of resin and hardener directly from 200-liter supplier drums. It features a Siemens operating panel for defining and controlling the mixing ratio, potlife, shotsize, and output via a touch screen interface.

Safety and Efficiency: To enhance process and operator safety, a vacuum-assisted follower plate module is recommended. This option is part of the available vacuum options to improve system performance.

Technical Specifications:

Components: 2 components
Viscosity Range: From approximately 60,000 mPas
Mixing Ratio: Adjustable with automatic regulation
Output: Flow rate adjustable between 5 to 20 l/min
Control: TARTLER software with touch panel operation
Tanks: 200-liter supplier drums
Basic Equipment: Volume flow control, turnable handling arm, rotating disposable plastic mixer, mobile steel frame, various coupling devices

Available Options:

Refilling/buffer container (4-drum system)
Electric/pneumatic unwind and re-wind unit for cables
Vacuum-assisted follower plate
Integrated air compressor

Applications: The system is suitable for adhesive filling and wind blade production.

Contact Information: For more details, contact TARTLER Shanghai China Ltd. at [email protected] or visit their website at www.tartler.com.

Catalog excerpts

NODOPOX wind SYSTEM FOR ADHESIVE PROCESSING Tailored system to processing pasty epoxy resins for the wind industry. Output up to 20 l/min* *depends on viscosity and mixing ratio

Open the catalog to page 1

NODOPOX wind SYSTEM FOR ADHESIVE PROCESSING POSSIBLE APPLICATIONS Î Adhesive filling Î Wind blade production This drum-following plate system is a system solution for the highly efficient production and processing of synthetic resin-based adhesives. The configuration of the NODOPOX wind is tailored to the requirements in the wind industry. It consists of a mobile basic system, which is supplemented by modules from the existing modular system. The system is designed as a 2K system, with an option for refilling resin and hardener. The material is obtained directly from the 200 l supplier drums....

Open the catalog to page 2

All TARTLER GMBH catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list