Wind Sensors Vertical A+T’s new 500 series high performance wind sensor is available in a full range of vertical wand configurations. The A+T 500 series vertical is fully compatible with the thousands of B&G 213 type units in use worldwide and with the instrument systems to which they are connected. It combines all the advantages of digital microprocessor sensing with the high resolution and response of analogue output – making it compatible with existing systems. Complete replacement for B&G 213 type wind sensor Also provides all spare parts for these Many improvements over the original units Much higher angular accuracy and repeatability – each unit is calibrated to 0.2° accuracy Carbon vane – faster response design Fully ceramic bearings giving better performance at low wind speeds and corrosion resistant, giving much longer life Lighter than legacy units Adjustable counterweight for fine tuning balance Graphite loaded body is conductive to lessen the chance of lighting/static damage Uses existing mast cable and compatible with existing instrument systems All parts and spares held in stock Two years warranty, excluding lightning damage and abuse A+T Instruments Ltd. 235 Bentley Way, Lymington, SO41 8JW, UK | +44 (0) 1590 718182 | [email protected] © A+T Instruments 2022 | Vertical Wind Sensor Pro

Wind Sensors Vertical Part Number Vertical Carbon Wand Vertical Carbon Wand Vertical Carbon Wand – offshore spec Vertical Carbon Wand Vertical Carbon Wand – offshore spec Vertical Carbon Wand Vertical Carbon Wand – offshore spec Mast cable for vertical Mast cable for vertical Mast cable for vertical Vertical mast wand test cable We can also update an existing wind wand with new electronics so as to re-use the carbon wand. The price for this service/upgrade is GBP 1,485 (ex VAT) and the part number is AT500MT. Note that A+T Instruments has no connection or affiliation with B&G or Navico A+T Instruments...