marine_accy_brochure_smc_2010_2011_2.pdf
20Pages

SUZUKI MOTOR CORPORATION reserves the right to add any Improvement to change the design or to discontinue any Item at any time without notice. Some Items might not be compatible with local standards or statutory requirements. Please check with your local AUTHORIZED SUZUKI DEALER for details at the time of ordering. Acutual colors might differ from those appearing In this catalogue. S2010 SUZUKI MOTOR CORPORATION. All rights reserved. Printed in Japan. ffi October 2010. Part number: 99000-79N12-071 SUZUKI MOTOR CORPORATION 300 TAKATSUKA-CHO, MINAMI-KU, HAMAMATSU CITY, JAPAN 432-8611 f Your AUTHORIZED SUZUKI DEALER ^| BEFORE YOU SAIL OUT, CHECK YOUR MOTOR AND FUEL FOLLOWING THE OWNER'S MANUAL, AND WEAR PROPER ATTIRE.

TABLE OF CONTENTS Dear Customer, GENUINE RIGGING-PARTS AND ACCESSORIES Quality. Dependability. Innovation. Everything that you expect from your outboard motors is delivered with style by SUZUKI. Demand no less from the products that SUZUKI MODULAR INSTRUMENT SYSTEM 04 you choose to enhance your total boating pleasure. Demand GENUINE SUZUKI INSTRUMENT ELECTRONIC INSTRUMENT 10 GAUGE CONNECTION CHART 12 ANALOG INSTRUMENT 14 SPC ELECTRONIC THROTTLE AND SHIFT SYSTEM 18 MECHANICAL REMOTE CONTROL SYSTEM 22 ACCESSORIES. This catalogue represents our commitment to provide you with the finest...

SUZUKI MODULAR INSTRUMENT SYSTEM SUZUKI MODULAR INSTRUMENT SYSTEM (SMIS) uses an easy to connect and expandable cable system to transmit graphic and numerical data to Multi-Function gauges. Easy to set up and install system can be used with nearly any boat and DF300 SUZUKI Outboard. Connected to the NMEA2000 compatible system, the gauges can display real-time readings from compatible electronic probes and the exclusive SMIS engine interface to monitor all engine functions. (Engine Monitor with 4" gauge only) SMIS MULTI-FUNCTION GAUGE The 4" multi-function gauge uses a state-of-the-art...

SUZUKI MODULAR INSTRUMENT SYSTEM ENGINE INTERFACE The most important part of the SMIS data system. DF300 of SUZUKI outboards can connect to the system, using Engine Interface Adapter. CONNECTION HARDWARE SENSORS T-CONNECTOR FLUID LEVEL SENSOR WITH A T-CONNECTOR WATER PRESSURE SENSOR WITH A T-CONNECTOR ENGINE INTERFACE ADAPTER 36664-88L00-000 012 T-connectors link all compatible cables, data and sensor devices, and can be easily secured. TERMINATOR FEMALE ENGINE INTERFACE UNIT WITH A T-CONNECTOR WATER TEMPERATURE SENSOR WITH A T-CONNECTOR 021 34960-88L00-000 34810-88L00-000 017 Monitors the...

ELECTRONIC INSTRUMENT TACHOMETER Readout Intake-manifold pressure 4” White Applicable Model DF70AT-175T/Z Not Applicable Model DF200T/Z-300T/Z kPa or psi kPa or psi Trim angle % Battery voltage Vdc 2-INCH-GAUGE HARNESS litre/hour or gallons/hour Cooling-water pressure Background kPa or lhg Fuel-flow amount Gauge Size hours Atomospheric pressure 34200-98J13-000 Required item for displaying IINTERFACE-UNIT-ADAPTER LEAD ˚C or ˚F Engine-operating hour CONNECTION between ENGINE and INSTRUMENT rpm Cylinder temperature 026 Unit Engine RPM ACTIVE-HUB UNIT Available on DF70A-90A with...

GAUGE-CONNECTION CHART Category ENGINE(S) 1 2 STATION 1 1 Note: Numbers between parentheses show the maximum quantities required. “KIT” in cells means the content of 4-INCH-GAUGE CONNECT KIT (34011-98J02-000). All signals go through the tachometer and are distributed to other gauges. It is essential to use the tachometer to bring the other gauges active. 3 1 Part Name & Description Quantity Of Parts To Be Used Per Boat Remarks Maximum speed: 130 kph / 80 mph 34100-98J11-000 027 Maximum speed: 110 kph / 60 knots 34100-98J41-000 028 SPEEDOMETER SENDER 34190-95500-000 TACHOMETER (1) (1) (1)...

ANALOG INSTRUMENT SPEEDOMETER 34100-93J00-000 TACHOMETER 052 053 34100-93J40-000 057 4” Black Maximum Speed 80km/h, 45knots Applicable Model DF25R-250T/Z 4” White Maximum Speed 80km/h, 45knots Applicable Model DF25R-250T/Z Bourdon-tube type speedometer with readings in km/h and mph. Includes vinyl tube, hardware and installation manual. Bourdon-tube type speedometer with readings in km/h and mph. Includes vinyl tube, hardware and installation manual. Bourdon-tube type speedometer with readings in km/h and knots. Includes vinyl tube, hardware and installation manual. Bourdon-tube type...

ANALOG INSTRUMENT FUEL GAUGE TRIM GAUGE HOUR METER 34800-93J00-000 VOLTMETER WATER-PRESSURE GAUGE 067 Background 2” Black Applicable Model DF40AT/AQH-250T/Z Gauge Size Magnetic-type gauge shows trim angle for optimum performance and efficiency. 34300-93J00-000 061 063 2” Black Applicable Model DF8AR-250T/Z Not Applicable Model DF9.9A/9.9TH/15/25 Gauge Size FUEL GAUGE alone works with the US Standard 250Ω sending unit. Use the 150Ω adaptor to connect the gauge to a European standard sending unit. 12-volt-electric-motor-driven meter indicates hours that your outboard motor has been operated...

SUZUKI PRECISION CONTROL ELECTRONIC THROTTLE AND SHIFT SYSTEM BOAT CONTROL MODULE (BCM) CONTROL PANEL 36770-98J02-000 Applicable Model 079 DF300T/Z CONNECTION BETWEEN ENGINE AND CONTROL SYSTEM 36621-98J00-000 37100-98J11-000 (R) 081 076 for Single-Engine Applicable Model DF300T/Z MAIN WIRING HARNESS 36775-98J00-000 080 081 DF300T/Z 36623-98J01-000 36620-98J00-000 084 6.5 meters for control system Applicable Model DF300T/Z BCM-CONNECT CAP 37100-98J21-000 BCM #1 WIRING HARNESS for Triple engines Applicable Model DF300T/Z DF300T/Z 36776-98J00-000 Applicable Model 36621-98J10-000 DUAL-STATION...

SINGLE ENGINE + SINGLE STATION DUAL ENGINE + SINGLE STATION SPACER KIT for REMOTE CONTROL BOX SIDE-MOUNT REMOTE CONTROL BOX for Single Binnacle-mount type for Dual Binnacle-mount type BATTERY LEAD CONNECTION between ENGINE and CONTROL SYSTEM MAIN WIRING HARNESS 5.0 meters for Control system_ 6.5 meters for Control system_ 8.0 meters for Control system_ 6.5 meters for Control system without Monitor-signal wire, Trim-sender wire and PTT-SW wire 2.0 meters for Control system 3.0 meters for Control system_