Railing bracket for solar panel SW-5065, SW-3064 The railing bracket HR-5065, HR-3064 will be clamped at the ridgit part of the railing. By adjusting the solar panel rectangular to the sun, power increase of 20% possible. Product Features • suitable for 25mm railing tubes • bracket 360° rotatable • position of axis adjustable • sandwich carrier plate 6mm • watertight cable plug • angle housing with flange • pre-assembled, ready to install • sea-/ saltwatertight • no sharp corners or edges • maintenance-free, weather-resistant HR 5065, HR 3064 are robust panel brackets, also designed for high wind loads. Module can be rotated around the tube axis and clamped by a handwheel screw. HR 5065, HR 3064 are easily and quickly removable. The flexible adjustable bracket ensures optimal orientation to the sun and allows performance improvement of up to 20% compared to a horizontal mounting. Another advantage: Low shadowing, because the module almost outside of the shadows cast by the rig. All mounting bolts, nuts, washers and cable clamps are included in V4A quality. For assembly only a screwdriver and wrench set, no additional tools are required. SunWare Solartechnik GmbH & Co KG TEL +49 (0)2151 47958 Dusseldorfer StraBe 80 MAIL [email protected]

TECHNICAL FEATURES Rail distance a [mm] Cable distance k [mm] Panel mounting screws for tube diameter [mm] Weight netto [kg] Weight brutto [kg] Packaging: 2x parcels suitable for solar panel Technical changes reserved. State 4/2013 Set contents The module bracket is delivered preassembled and ready confectioned. The set consists of: 1 x carrier plate 2 x support rails with clamp slide 2 x clamp bushings for 25mm pipe 4 x countersunk screws M5x20mm, washer, nuts V4A 4 x countersunk screws M4x18mm, washer, nuts V4A 4 x screw rosettes white 4 x cable clamps black 4 x pan head tapping...