Solar modules S-series 24V State 2012 Solar modules S-series 24V 24V solar modules with cable outlet front side mounted. Designed for boats, flat trucks, navigation aids, sea buoys, streetlamps and many other. Made in Germany. Product charateristics l 100% sea- & saltwater resistant l Non-Glass-module with unbreakable Nowoflon foil l Mounting plate made from saltwater resistant, powder-coated stainless steel l Cable output screwed, sealed and utterly water proof l Crystalline cells of highest performance class for maximum power l Ultraflat module construction (5mm), at cable output 15mm l Connection cable of 3m length l Rounded corners to prevent risk of injuries SunWare Solartechnik GmbH & Co KG TEL +49 (0)2151 47958 Düsseldorfer Straße 80 MAIL [email protected] l On the side, the laminate overhangs the mounting plate by approx. 5mm for a maximum of corrosion protection l Structured surface reduces slip risks when wet l 100% maintenance-free, self-cleaning surface l Installation without rear ventilation by module structure with 80 cells; gluing or with SunWare-clips l Walkable when installed on a solid surface (using boat shoes) l Modules can be slightly bent till max. 3% (3cm/1 meter) l 3 years warranty on power output

TECHNICAL FEATURES Cell sizes Bore holes (D=5,5mm) Weight netto Weight brutto Cable Cell-protector Valid for all modules: Uoc = 48V / laminate: ETFE, EVA, stainless steel / 80 cells / für 24V-systems / individually packed / cable length 3m / carrier plate VA (1.4571) pulver coated white / serial connection not permitted Environmental conditions : – 40 up to + 85 °C, thermal characteristic values: TK Isc: -1,1mA/K, TK Uoc: -2,3 mV/K, TK Pmpp: -19.0 mW/K *According to STC (standard test conditions), AM 1,5, 1000 W/m², 25°C, measuring tolerance: 10%. Technical changes reserved. State 9/2012 Electrical...