Catches & Latches
86Pages

{{requestButtons}}

Catalog excerpts

Catches & Latches - 2

224 PUSH KNOB LATCHES Picture Item Name Retaining Force Page (kgf) Item Name Retaining Force Page (kgf) CATCHES & LATCHES KNUCKLE CATCHES / TENSION CATCHES Picture Item Name Push-in / Pulling Force Page (kgf) MAGNETIC TOUCH LATCHES Picture Item Name Magnetic Force Page (kgf) NON-MAGNETIC TOUCH LATCHES Picture Item Name Retaining Force Page (kgf)

Open the catalog to page 2
Catches & Latches - 3

MAGNETIC CATCHES

Open the catalog to page 3
Catches & Latches - 4

225-1 COUNTER PLATES Picture FLUSH SLAM LATCHES Magnetic Force Page (kgf) Item Name Item Name CATCHES & LATCHES DRAW LATCHES LEVER LATCHES Picture Item Name Retaining Force Page (kgf)

Open the catalog to page 4
Catches & Latches - 5

SLIDE/BARREL BOLTS SLIDING DOOR LATCHES Item Name Door thickness Item Name Door thickness

Open the catalog to page 5
Catches & Latches - 6

CATCHES & LATCHES PUSH KNOB LATCH ZL-2901 Features Superior finish of Mirror/Satin Safe and smart design: door will be locked when knob is pushed in. Can be used for overlay and inset door (Door thickness: 13-23 mm). Latch and knob are sold as a set. Parts Included Round head wood screw 3.110, 3.128 (SUS) Part Name Push Knob Latch Body Latch Body Latch Counter Plate Truss Head Tapping Screw M325 PUSH KNOB LATCH Material Stainless Steel (SUS316) Stainless Steel (SUS316) ABS Polyacetal (POM) ABS Stainless Steel Finish/Colour Zwei L Finish Zwei L Finish Black Black Black

Open the catalog to page 6
Catches & Latches - 7

PUSH KNOB LATCH CATCHES & LATCHES Safe and smart design: door will be locked when knob is pushed in. Can be used for overlay and inset door (Door thickness: 15-25 mm). Door stopper is not needed. Latch and knob are sold as a set. Parts Included Binding head tapping screw 420 (SUS) Pan head tapping screw 314 (SUS) DPL-RO-G Push Knob and Surface Ring Latch Body and Counter Plate Pan head tapping screw 3×14 Latch body Dimension from the back side of the door 7 Binding tapping screw 4×20 Surface ring Side board Door Pan head tapping screw 3×14 Part Name Latch BodyCounter Plate Push KnobSurface...

Open the catalog to page 7
Catches & Latches - 8

PUSH KNOB LATCH PKL05 Features Safe and smart design: door will be locked when knob is pushed in. Can be used for overlay and inset door (Door thickness: 15-25 mm). Round head wood screw 3.110, 3.128 (SUS) Latch Body and Counter Plate Door surface Latch body Truss head screw M3×25 SUS Counter plate Item Code Item Name Right Right Left Gold Chrome Gold Chrome Push Knob (Dimension from door surface) Side board Round head screw 3.1×10 SUS Push Knob CATCHES & LATCHES Parts Included PKLW Right-handed shown. Part Name Push Knob Latch Body Counter Plate Item Code Item Name Colour Retaining Force N...

Open the catalog to page 8
Catches & Latches - 9

PUSH KNOB LATCH Truss head screw M325 (SUS) Round head wood screw 3.110, 3.128 (SUS) Option Spacer (below) PKLB CATCHES & LATCHES Safe and smart design: door will be locked when knob is pushed in. Can be used for overlay and inset door (Door thickness: 15-30 mm. For thin door, please use a plastic spacer, sold separately). Truss head screw M3×25 SUS 1530 Side board Latch body Push knob Application Example Part Name Push Knob Latch BodyCounter Plate Spacer (Option) Push Knob Item Name PKL-08/GA PKL-08/CR PKL-08/BN Finish Gold Chrome Black Nickel Material Zinc Alloy (ZDC) ABS ABS Latch...

Open the catalog to page 9
Catches & Latches - 10

PUSH KNOB LATCH TLP Features Safe and smart design: door will be locked when knob is pushed in. Keeps the door closed due to the spring loaded latch. Flexible to suit door thickness by adjusting screw. Can be used for overlay and inset door (Door thickness: 19-30 mm). TLP 3 POINT (P.232 233) is suitable for tall cabinet door. CATCHES & LATCHES Parts Included Screw to install latch body: Pan-head tapping screw 320 (SUS) Screw to install counter plate: Pan-head tapping screw 316 (SUS) Screw to adjust door thickness: M4x24, M4x30 TLP-CR Brown is also available as special order. Bore Dimensions...

Open the catalog to page 10
Catches & Latches - 11

PUSH KNOB LATCH TLP-S Features CATCHES & LATCHES Safe and smart design: door will be locked when knob is pushed in. Flexible to suit door thickness by adjusting screw. Spring loaded latch keeps the door closed. Can be used for overlay and inset door (Door thickness: 19-30 mm). Parts Included Screw to install latch body: Pan-head tapping screw 320 (SUS) Screw to install counter plate: Pan-head tapping screw 316 (SUS) Screw to adjust door thickness: M424, M430 Bore Dimensions (Door) Parts Structure Screw Latch body Spring loaded latch Dimension above is for inset door. Push knob PUSH KNOB...

Open the catalog to page 11
Catches & Latches - 12

PUSH KNOB BAR LATCH Plate for Swing Door 9 Bottom board Push Knob 10 1 Spring loaded latch PUSH KNOB BAR LATCH CATCHES & LATCHES Suitable for tall cabinet door. Centre latch with dead bolt, top and bottom cams. Door will be locked when knob is pushed in. Applicable from 19 mm to 30 mm door thickness. Able to install for both inset and overlay door. Non-handed. Dead bolt

Open the catalog to page 12
Catches & Latches - 13

233 Bore Dimension (Door) 25.2 CATCHES & LATCHES 16.5 Inset door application Overlay door application Bore Dimension (Cabinet) Top board Side board PUSH KNOB BAR LATCH Parts Details Push Button Push Button Push Button Latch Body Zinc Alloy (ZDC)/ Satin Gold Brass Zinc Alloy (ZDC)/ Satin Nickel Brass Zinc Alloy (ZDC)/ Gold Brass Zinc Alloy (ZDC)/ Chrome Brass Polyamide White (PA) Prop (Length: 1100) Prop (Length: 1550) Counter Plate for Double Swing Door Parts Set (White) Parts Set (Brown) Push Button Finish/ Colour Door Thickness Item Name Item Code Parts Included in Part Name Counter Plate...

Open the catalog to page 13
Catches & Latches - 14

PUSH KNOB LATCH CATCHES & LATCHES Pull the handle while pushing the button to open door. Spacer, for door thickness 18-21 mm (SL-B211) and 22-25 mm (SL-B251) included. Parts Included Pan head tapping screw 314 Bore Dimensions (Door) Min. 2 mm Handle Installation Example ϕ26 Counter bore (back side of door) PUSH KNOB LATCH Item Code Item Name Colour Ivory Brown Ivory Brown Door Thickness Necessary Unnecessary Necessary Unnecessary Necessary Unnecessary Necessary Unnecessary Part Name Body Latch Spacer Counter Plate Push Button Base Washer (14) Nut (M14) Material Polyamide (PA) Polyamide (PA)...

Open the catalog to page 14
Catches & Latches - 15

PUSH KNOB LATCH SL-G25, SL-GB25 Features Knob and slide latch are combined in one unit. Wide push button on knob allows easy operation. CATCHES & LATCHES Parts Included Pan head tapping screw 314 Bore Dimensions (Door) Application Example ϕ5 Counter bore (front side of door) Bottom panel Bottom panel Item Code Item Name Colour Retaining Force N Retaining Force kgf 140-060-030 SL-G25L-I Ivory 156.8 N 16 kgf 140-060-022 SL-G25R-I Ivory 156.8 N 16 kgf 140-060-038 SL-GB25-I Ivory 156.8 N 16 kgf Side board Part Name Body Latch Counter Plate Knob Lever Washer (14) Material Polyamide (PA)...

Open the catalog to page 15

All Sugatsune Kogyo Co. catalogs and brochures

  1. Locks

    54 Pages

  2. Lid Supports

    72 Pages

  3. Hooks

    42 Pages

  4. Hinges

    126 Pages

  5. Door Hardware

    68 Pages

  6. Slide Rails

    40 Pages

  7. Handles & Knobs

    108 Pages

  8. Miscellaneous

    16 Pages

  9. Casters

    35 Pages

  10. Drawer slides

    36 Pages

  11. Zwei L

    39 Pages