1. Catalogs
  2. Sub-Atlantic
  3. FOR228_Brushless_DC_Thrusters_Data_Sheet_090512

FOR228_Brushless_DC_Thrusters_Data_Sheet_090512

FOR228_Brushless_DC_Thrusters_Data_Sheet_090512

FOR228_Brushless_DC_Thrusters_Data_Sheet_090512

Product catalog summary
Overview
Sub-Atlantic introduces a new range of brushless DC thrusters featuring innovative Statorshield™ Technology, designed for enhanced reliability and performance. These thrusters are available in four sizes, offering low weight and high thrust capabilities.

Key Features
  • High reliability with rugged design.
  • Unique Statorshield™ Technology for continued operation despite shaft seal failures.
  • Direct drive reliability without the need for a gearbox.
  • Lightweight design with integral drive electronics.
  • Available in various sizes and voltage options.

Statorshield™ Technology
This technology prevents water ingress through the shaft seal, avoiding short circuit failures. It uses a sealed diaphragm to separate the rotor and stator, ensuring continued operation until maintenance can be performed.

Innovative Shaft Sealing
The thrusters incorporate ceramic wear ring technology to prevent shaft wear and seal damage, reducing the risk of flooding.

Integral Drive Electronics
All models, except the SPE-380, include built-in drive electronics. They support analogue control and some models offer serial and CAN control options.

Depth Rating and Pressure Compensation
Thrusters are rated for depths up to 3,000 meters, with potential for full ocean depth when electronics are housed separately. Both rotor and stator cavities are pressure compensated.

Brush and HPU Options
The thrusters can also drive HPUs and be adapted for cleaning tools on specific vehicles.

Model Specifications
ModelPropeller DiameterBollard ThrustSupply VoltageControlWeight in AirWeight in Water
SPE-75144mm26 kgf300 Vdc+/- 5 Vdc3.3 kg2.0 kg
SPE-180178mm45 kgf300 Vdc+/- 5 Vdc5.9 kg3.8 kg
SPE-250246mm100 kgf600 Vdc+/- 5 Vdc & CAN13 kg8.0 kg
SPE-380385mm220 kgf600 VdcRequires separate controller42 kg25 kg

Contact Information
For further inquiries, contact Forum Subsea Technologies at their offices in Aberdeen, Houston, Singapore, Brazil, or Kirkbymoorside, York. Email: [email protected]
See more

Catalog excerpts

FOR228_Brushless_DC_Thrusters_Data_Sheet_090512-1

everything remotely possible™ Brushless DC Thrusters Sub-Atlantics new direct drive range of brushless DC thrusters break new ground in thrust, low weight and enhanced reliability. They are currently available in four sizes, each incorporating Sub-Atlantics unique Statorshield™ Technology. Sub-Atlantics unique Statorshield™ system allows the thruster to continue running in the event of a shaft seal failure and subsequent flooding, without damage to the winding or electronic components. Integral electronic drives are oil filled and pressure compensated to 3000 metres / 10,000 feet. Four sizes are available with propeller diameters up to 380mm / 15” and bollard thrusts up to 220 kgf / 485 lbf. FEATURES • High reliability, Rugged Design • Unique Statorshield™ Technology • Continued Operation in the Event of Shaft Seal Failure • Forward/Reverse Thrust within 5-10% band • Four sizes available • Direct Drive Reliability (no gearbox) • Lightweight Design • Integral Drive Electronics • Various Connector Options • Various Voltage Options

 Open the catalog to page 1
FOR228_Brushless_DC_Thrusters_Data_Sheet_090512-2

everything remotely possible™ Brushless DC Thrusters Image Thruster Model SPE-75 Propeller Diameter 144mm 5.7 inches Maximum Supply Voltage Control Bollard Thrust (Standard) 26 kgf 300 Vdc +/- 5 Vdc 57 lbf Weight in Air 3.3 kg 7.3 lbs Weight in Water 2.0 kg 4.4 lbs SPE-180 178mm 7.0 inches 45 kgf 300 Vdc +/- 5 Vdc 99 lbf 5.9 kg 13.0 lbs 3.8 kg 8.4 lbs SPE-250 246mm 9.7 inches 100 kgf 600 Vdc 220 lbf +/- 5 Vdc & CAN 13 kg 28.6 lbs 8.0 kg 17.6 lbs 385mm 220 kgf Requires 42 kg 25 kg separate controller 93 lbs 55 lbs SPE-380 600 Vdc 15.2 inches 485 lbf STATORSHIELD™ TECHNOLOGY EQUATES TO RELIABILITY...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.