everything remotely possible™ Brushless AC Thrusters Sub-Atlantics range of brushless AC thrusters have low weight and enhanced reliability. They are currently available in two sizes. The first which is the CTE-01 has a 150mm propeller and the second which is a CTE-02 has a 178mm propeller. The thruster comparison figures are highlighted in the table below. Model CTE-01 Mk1 CTE-01 MkII CTE-02 Mk1 Units Single Double Single Double Single Double Fwd Thrust @60Hz N 285 285 285 285 442 481 Rev Thrust @60Hz N 255 285 255 285 353 481 Electric Power KW 1.0 1.1 1.0 1.1 2.0 2.2 Voltage VAC 440 V3 Phase Weight in Air Kg 8.5 9.8 8 9.3 13 15 Weight in Water Kg 5.9 6.5 5 6.4 6.3 9.6 Connector Sub-Atlantic 5 Pin Connector Whip in 500mm or 1000mm Length Depth Rating Oil FIlled, Full Ocean Depth Construction Aluminium, Stainless Steel Plastics & Ceramics CTE-02 MkII Single Double 442 481 353 481 2.0 2.2 12 8.1 14 9.2 FEATURES • High reliability, Rugged Design • Forward/Reverse Thrust within 5-10% band • Two sizes available • Direct Drive Reliability (no gearbox) • Lightweight Design • Various Connector Options INNOVATIVE SHAFT SEALING The thruster incorporates our proven ceramic wear ring technology used on all of our current electric and hydraulic thrusters. The ceramic ring provides a durable hard surface that prevents wear to the shaft and the resultant seal damage and consequential flooding. BRUSH AND HPU OPTIONS FORUM SUBSEA TECHNOLOGIES Aberdeen: +44 (0) 1224 798660 Houston: 1 713 329 8230 Singapore: +65 657 64300 Brazil: +55 21 2588 8016 Kirkbymoorside, York +44 (0)1751431751 Our brushless AC thrusters are also used to drive HPU’s and there are cleaning brush options for both the CTE-01 and CTE-02 thrusters. Please ask for more details. [email protected] www.f-e-t.com/contact PRESSURE COMPENSATION These thrusters must be externally compensated. A range of compensators can be bought from Sub-Atlantic.