everything remotely possible™ Compensator / Reservoir 13.5 Litre Our 13.5 Litre / 3.6 usg positive pressure compensator is manufactured from plastic, stainless steel and aluminium alloy materials. It is available with an optional analogue level sensor. Mean compensation pressure is 0.5 bar / 7 psi. An adjustable pressure relief valve, normally set at 1 bar, protects the unit from overfill and thermal expansion of the oil. Mounting feet are incorporated in the end caps. A compact analogue sensor that provides 0-100% level capacity feedback is available as a bolt-on option. Multiple compensators can be plumbed in parallel to increase total oil capacity using only a single level sensor. Ports are available in both SAE and BSPP versions. FEATURES SUB-ATLANTIC PART NUMBERS • 13.5 litre / 3.6 usg capacity • Extremely Lightweight • Corrosion Resistant Materials • Adjustable Pressure Relief Valve • Positive Pressure • Two Pressure Options • Level Sensor Option • Integral Mounts • SAE or BSPP Versions • 13.5L Compensator: SA-HC-13500 • Drawing number: 2442-GA • 13.5L Compensator: SA-HC-13500-LS • Drawing number: 2442-GA • Charger assembly: 3691-MAS • Blanking and charger Kit: KIT-0159 Specifications Level Sensor (Y/N) N Y Actual Pressure-Full Pressure-Near Mass in Air- Mass in Sea WaterCapacity (L) Charge (Bar) Empty (Bar) full of oil (KG) full of oils (KG) 13.1 0.48 0.24 28.3 7.6 13.3 0.48 0.24 29.0 7.9 FORUM SUBSEA TECHNOLOGIES Aberdeen: +44 (0) 1224 798660 Houston: 1 713 329 8230 Singapore: +65 657 64300 Brazil: +55 21 2588 8016 Kirkbymoorside, York +44 (0)1751431751 [email protected] www.f-e-t.com/contact