everything remotely possible™ Hydraulic Power Unit 1.3 Kw This small Hydraulic Power Unit (HPU) delivers 4 Lpm / 1 usgpm at adjustable pressures up to 200 bar / 3000 psi and is suitable for powering manipulators, tools etc. A gear pump is driven by a 3 phase, 440 Vac electric motor. This is the same type as used on Sub-Atlantic’s reliable CTE-02 electric thrusters. An integral, externally adjustable pressure relief valve is used to set the system pressure and a quickchange suction filter cartridge is fitted into the body. FEATURES SUB-ATLANTIC PART NUMBERS • Adjustable Pressure Relief Valve • Low Cost Replacement Pumps • 440 AC Operation • Seal Between Motor and Pump • Starts Under Load • 1.3 Kw HPU: SA-H-3637-MAS • Drawing number: 3806-GA Specifications HYD POWER 1.3kW PUMP FLOW 4 LPM MAX PRESSURE 200 Bar MOTOR VOLTAGE 440Vac DEPTH RATING 3000msw WEIGHT IN AIR 14.5 kg OIL TYPE (MOTOR) Transormer Diala GX or Tellus 22 (Motor Draws Less Current W ith Diala GX) OIL TYPE (PUMP) PORTS Tellus 32 or 22 (Temp. Dependant) 3/8” BSPP FORUM SUBSEA TECHNOLOGIES Aberdeen: +44 (0) 1224 798660 Houston: 1 713 329 8230 Singapore: +65 657 64300 Brazil: +55 21 2588 8016 Kirkbymoorside, York +44 (0)1751431751 [email protected] www.f-e-t.com/contact