everything remotely possible™ D-POS Deck-mounted Taut Wire System A DPS peripheral DP reference sensor suitable for varied subsea vessel applications in up to 400 metre water depth. WEIGHT • (Approx) 3 tonnes DIMENSIONS • (Inboard L x W x H): 2.20 x 1.60 x 3.75 metres • (Outboard L x W x H): 6.20 x 1.60 x 1.90 metres (3.55m outboard reach) WIRE • 4.9mm x 500m (laid to drum using on-board level-wind system) OUTPUTS SELECTABLE FROM • Analogue/Digital • Serial (custom string to suit customer) • Ethernet (custom string to suit customer) • Alarm outputs (N/O & N/C Relays) SUPPLY REQUIREMENTS • 3-Phase 440VAC Approx 50A • UPS supplied 220VAC Approx 20A • Pneumatic air supply 6 bar operating pressure OTHER REQUIREMENTS • Indoor, climate-controlled area required for taut wire OPERATOR CONTROLS • High speed control push button • Emergency stop • Local/Remote control switch • System reset/Acknowledge • Manual operation at local control panel • Advanced configuration & maintenance functions through • Approx cabinet dimensions L x W x H: 0.6 x 1.0 x 1.6 metres control cabinet The specification details are illustrative for marketing purposes only. Actual equipment may be different as a result of product improvement or other reasons. Specific interface and performance information should be reconfirmed at time of order placement. touch screen operator control • Fully integrated operational safety features • Remote operator control panel OPERATOR INDICATORS • Weight landed indicator • System fault indicator • Emergency stop activated indicator