*mynauticexpo

ECO®

ECO®

Product catalog summary

Product Overview
ECO© ECG and ECO© AMF are microprocessor-controlled devices designed for low voltage single genset applications in standby power generation. They feature a waterproof stainless steel housing for protection in harsh environments and allow start-stop control of various prime movers. The devices offer comprehensive protection functions, engine speed determination via a magnetic pick-up, and operational readiness checks through a test button. They support multiple alarms and event storage, with active alarms indicated by an integrated beeper and colored LEDs. Communication is facilitated via a CAN Bus interface supporting various engine controllers.

Panel Mounting and Terminal Connections
The devices are designed for easy installation and replacement with fast mounting brackets and plug-in terminals. Despite their compact size, they include all necessary functions for genset control.

Connections
ECO© ECG and ECO© AMF provide connections for generator current and voltage measurement, contactor or breaker control, magnetic pick-up, programmable relays and outputs, digital inputs, charger alternator excitation, and CAN Bus interface. They are powered by a 24Vdc supply and support optional module expansion.

Additional I/O Modules
Optional functions can be added via three different I/O modules: ECO© IO Digital I/O module, ECO© 485 Serial interface module, and ECO© WEB server module. Up to two modules can be attached simultaneously.

Technical Specifications

Dimensions: 214 × 178 × 35 mm, Cut out: 194 × 164 mm
Weight: 1.35 kg
Power Supply: 12-36 V DC
Power Consumption: <10 W
Ambient Conditions: Service temperature -20°C to +70°C, Humidity < 80%
Degree of Protection: Front panel IP65, Terminal side IP20
Voltage Measurement: Range 3 to 300VAC L-N, 5 to 500VAC L-L
Current Measurement: CT secondary current 1A/5A
Communication: USB for SCADA and setup, CAN bus for engine interface

Catalog excerpts

Product Sheet ECO® Types ECG, AMF – Technical data product sheet eco ecg-amf - technical data gb v1.0.docx

Open the catalog to page 1

Product Sheet Product overview ECO© ECG and ECO© AMF are microprocessor controlled devices for use in low voltage single genset applications for standby power generation. The front-side waterproof stainless steel housing provides optimum protection against influences in a harsh environment. Both device types allow the start-stop control of various kinds of prime movers, and provide comprehensive protection functions in order to ensure the safe operation of singlegensets. A magnetic pick up (MPU) can be used to determine the engine speed. Using the test button, the operator can perform regular...

Open the catalog to page 2

Product Sheet Panel mounting and terminal connections Fast mounting brackets and plug-in terminals allow a time-saving installation and easy replacement of a device. ECO© ECG, ECO© AMF rear view Although the ECO© ECG and ECO© AMF devices feature small housing dimensions, they still contain all the necessary functions for the control of generator sets. ECO© ECG, ECO© AMF dimensions and cut out in mm product sheet eco ecg-amf - technical data gb v1.0.do

Open the catalog to page 3

Connections ECO® ECG and ECO® AMF ECO® ECG and ECO® AMF provide the following connections for measurement and control of the genset: • Generator current measurement 3 phase + ground current • Generator voltage measurement 3 phase + neutral • Generator contactor or breaker control • Mains contactor or breaker control (ECO® AMF only) • Mains voltage measurement 3 phase + neutral (ECO® AMF only) • Magnetic pick up • 2 Programmable function relays and 4 programmable transistor outputs • 4 Programmable analog/digital inputs (resistive senders) • 7 Programmable digital inputs • Charger alternator...

Open the catalog to page 4

Product Sheet Additional I/O modules Optional functions can easily be added to the ECO© ECG and ECO© AMF devices. There are three different I/O modules available, of which up to two can be snapped onto the basic device simultaneously. ECO© ECG, ECO© AMF side view with additional I/O module The following different I/O modules are currently available: • ECO© IO Digital I/O module with 8 digital Inputs 24VDC and 8 relay outputs 6A/250V. • ECO© 485 Serial interface module with RS 485 interface for Modbus communication. • ECO© WEB WEB server module with Ethernet interface for remote monitoring and...

Open the catalog to page 5

Product Sheet Technical specification ECO ECG, ECO® AMF

Open the catalog to page 6

All Stucke Elektronik GmbH catalogs and brochures

SYMAP®- COMPACT
2 Pages
SYMAP®R
7 Pages
SYMAP®
2 Pages