*mynauticexpo

ST7-TF

Product catalog summary

Overview: The ST7-TF is an industrial vacuum cleaner designed for central systems, featuring a three-phase turbine and both automatic and manual starter options. It includes a self-cleaning filter system and a pneumatic lifting mechanism for the dust collector bucket.

Specifications:

Voltage: 400V, 50 Hz
Control Voltage: 12 Volt
Suction Volume: 530 m³/h
Suction Vacuum: 300 mbar
Supply Air Pressure: Max 9 bar
Vacuum Turbine Power: 7.5 kW
Noise Level: 74 dBa
Dimensions: 520 x 1100 x 1750 mm
Weight: 230 Kg

Features:

Equipped with a programmable electronic board for automatic suction start.
Self-cleaning filters activate every 15 minutes to maintain optimal performance.
Includes a removable dust container bag for easy maintenance.

Cleaning System: The vacuum cleaner uses a mechanical shaking cleaning system controlled by an electronic board. This system employs a pneumatic piston to shake the filter, ensuring dust falls into the powder container. This method is more efficient than vibrating motor or air jet versions, especially for fine powders that can clog filters quickly.

Advantages:

Automatic cleaning reduces manual maintenance requirements.
Self-cleaning filter is guaranteed for 5 years, minimizing replacement costs.
Designed for minimal maintenance time.

Manufacturer: STUCCHI 1950 s.r.l. www.stucchi.net

Catalog excerpts

POWDERS EXHAUST SYSTEMS CONTROL VOLTAGE SUCTION VOLUME SUCTION VACUUM VACUUM TURBINE

Open the catalog to page 1

ST7-TF INDUSTRIAL VACUUM CLEANER FOR CENTRAL SYSTEM. THREE-PHASE TURBINE. AUTOMATIC AND MANUAL STARTER OF THE TURBINE. SELF-CLEANING FILTER SYSTEM. PNEUMATIC LIFTING OF THE DUST COLLECTOR BUCKET. SELF-CLEANING FILTERS EACH 15 mins. PROGRAMMABLE ELECTRONIC BOARD REMOVABLE DUST CONTAINER BAG AUTOMATIC SUCTION START THREE-PHASE TURBINE

Open the catalog to page 2

To Effectively dean the filters mounted on the dust extractor, a mechanical shaking cleaning system has been developed. The electronic board controls automatically a pneumatic piston which, by shaking the filter intensely, causes, to the dust deposited filter, to fall into the powder container, thus allowing the filter to run optimally. Piston cleaning system is recommended for any type of application, because it improves significantly the filter cleaning compared to the "vibrating motor" or "air jet" versions. To dean the filter with the vertical piston becomes mandatory when it comes to extract...

Open the catalog to page 3

ST7-TF

ST7-TF

Catalog excerpts

All Stucchi 1950 S.r.l. catalogs and brochures